Brunswick Panatrope with Radio S31
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Groundhog, that is just a lovely radio and the style I like. The price was exceptional. Just a classic looking radio from the era. No tubes, well, unless there are a pair of 45s, should be very reasonable to restuff it. I would have preferred something similar without the turntable but it looks like that one is complete. You just done good! I would go for that over a 12 tube Zenith. I love that screen "door" on the back. Same as my Fada 46. I hope you don't encounter and pot metal problems as I did.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
(This post was last modified: 07-11-2014, 05:18 PM by jerryhawthorne.)
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Wow, look at the prices. We here cannot buy junk for this price.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
There are a pair of 245s in mine but mine has the B-Tully radio. Must be a month or two newer than yours.
You will probably need to re-rubber and re-magnetize the pick-up.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Tube lineup looks like 4- 24's, a 27, an 80, 2- 45's and a "regulator" tube. I got a deal on a pair of 45's last fall on the bay for my Philco 95 Lowboy...I'll just keep watching. Have to figure out what the regulator tube is.
(This post was last modified: 07-11-2014, 05:57 PM by Groundhog74.)
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Ballast. What number is it supposed to be?
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Looks like it's supposed to be a D-110.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
(This post was last modified: 07-12-2014, 01:02 AM by Phlogiston.)
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Very nice Phlog (Russ).
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Does anyone know if the metal parts, dial escutcheon, tone arm, medallion, needle cups, etc. are brass, brass plated or what? I'd like to clean/polish them up but not sure how they are made and what to use when restoring. Thanks for any help.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
I'll look, but I think that they are nickel plated and can be cleaned if you don't get too aggressive.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 4,705
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I would clean them, but be very careful about polishing them, particularly the dial escutcheon. In spite of what many think a lot of trim parts on old radios and phonographs were not supposed to bright metal to start with, they left the factory with a matte, an antiqued, or sometimes a blued finish. If that Brunswick were mine I would give that stuff a cleaning but leave it alone, it looks very nice as it is.
Regards
Arran
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Wow that's very nice 2 hr drive would be worth it cabinet looks to be in great shape finish original ?
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
As far as I can tell everything is original. There are a few flaws in the finish that do not show up on camera, small pieces of veneer chipped out on an egde etc., but nothing major. Should clean up very nicely. I thought for the price I got it for, a 2 hour drive was worth it. The only things I have noticed during initial cleaning are the power cord is frayed in a couple of places (no biggie) and the dial scale is popped loose from the tiny rivets that hold it in place at both ends, the center rivets are still holding. I found a source for a reproduction of the original owner's manual, and I will order it soon. The felt on the turntable is in really good shape, but extremely dirty. A good cleaning with something (?) will probably make a huge difference in it's appearance. Hopefully I can collect all the tubes I need soon and start on getting it working.....along with the other half dozen radios that need fixed. 
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco 60 Squealing
|
| All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
|
Philco 60 Squealing
|
| I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM |
|
Philco 46-420 Code 121 Reception issues
|
| Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
|
Philco 46-420 Code 121 Reception issues
|
| You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
|
Philco 42-1008 conversion kit
|
| Interesting. I haven't seen that before.klondike98 — 07:02 PM |
|
12' Philco
|
| Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
|
Shadow Meter Bulb
|
| Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
|
Shadow Meter Bulb
|
| Ok. Thanks for the correction.RossH — 03:09 PM |
|
Model 28L
|
| For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM |
|
37-60 revision 6
|
| I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM |
|
Who's Online
|
There are currently 4442 online users. [Complete List]
» 2 Member(s) | 4440 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
