Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

More 91X pics
#1

I finally had a few minutes free to pull the chassis and back of my acquisition and check things over. Very clean chassis, no rust whatsoever. Underneath only repair is the replacement of the AC line caps. There are signs of melted wax from the power transformer that I am a little concerned about, but everything looks okay otherwise. The speakers are darn near mint!!!! Also found about 100ft of heavy gauge antenna wire coiled up behind the back panel! Still has the two original 42 globe amp tubes which is pretty neat. One tube has a "New" 12-6-53 sticker on it, so this set was going for awhile. So, for now I did a quick clean up on the chassis and cabinet and it now resides in my house. Now! Back to my chores!
P.S. Why is it that there is ALWAYS at least one missing chassis mounting screw?!!!!!!!
[Image: http://i1160.photobucket.com/albums/q500...01fd81.jpg]
[Image: http://i1160.photobucket.com/albums/q500...05f5dc.jpg]
[Image: http://i1160.photobucket.com/albums/q500...2968f5.jpg]
[Image: http://i1160.photobucket.com/albums/q500...cb992e.jpg]
[Image: http://i1160.photobucket.com/albums/q500...96ef4b.jpg]
[Image: http://i1160.photobucket.com/albums/q500...7491eb.jpg]
[Image: http://i1160.photobucket.com/albums/q500...ed9809.jpg]
#2

Bet she will sound spiffy.....

Paul

Tubetalk1
#3

WOW
that is a great find Icon_mrgreen
looks really clean, no rust, very little to refinish
good luck maybe post youtube to see how it sounds ?
sam
#4

It looks like the lacquer is lifting in some places, such as near the speaker grille, and it looks like someone brushed some sort of clear coat over the top, like varnish or shellac. But other then that it looks like a good solid cabinet.
Regards
Arran
#5

You are a lucky man!
#6

Wow! The cleanest I've seen. It's a great performer on the BC band. Hope it sounds as good as it looks!!!
Terry
#7

I really, REALLY need to get my speakers reconed now! Mine is an example of what happens when you take the console apart and leave it sit in a backroom for 10 years! Seemed every critter attacked my speakers in that place! :LOL: I like these units though, good sound for the time.

No matter where you go, there you are.
#8

NICE!! And it has both globe 42 tubes......
#9

Sweet find Icon_thumbupIcon_thumbupIcon_thumbup




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 4039 online users. [Complete List]
» 2 Member(s) | 4037 Guest(s)
AvatarAvatar

>