Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Info needed on 1930 Concert Grand
#1

Can any one please tell me if the record player on this model (1930 Concert Grand) is the same as fitted to any other model.
Is there anywhere that I can see any pictures of what the Phono/Gramm should look like. Also a picture of the speaker and what model number should be on it.
Many thanks, Tony
#2

Hi

Are you lucky enough to own a Concert Grand? If so...congratulations! That is, in my opinion, one of Philco's finest pieces of furniture.

The phonograph mechanism is a single-play 78 rpm phonograph, and is the same as used in the smaller Model 296 radio-phono.

I think I have a complete mechanism here, but the shipping would be a killer (heavy).

I seem to recall that a Model G speaker was used in this model, as well as most of the 1930 Philco consoles (the exceptions being the battery and DC models, and the 20 Baby Grand Console). It's either a G or H; I think the H was used in 1931 models? Not positive right now. I can't remember every detail. Icon_smile

--
Ron Ramirez
Ferdinand IN
#3

Ron
I hope you received my email.

Many thanks
Tony
#4

Concert Grand
Can anyone please tell me where I can see a picture of the correct speaker for this Concert Grand machine.
As above Ron said he thought it was a model G speaker was this made by Philco and would it have a model number on it.
Many thanks
Tony
#5

Concert Grand
I am totally new to this forum and really asking for help.
I have some old radios and this Philco is one I have always wanted to get going.

I have found a Philco model G 10 inch speaker that I can buy.
Can someone please tell me if this is defiantly the correct speaker for the concert Grand and was it a 10 inch speaker or maybe a 12 inch that they had.
Can any of you collectors that have one of these radios please help me with the correct information that I need.
I am in New Zealand so as you can imagine I don't want to buy a speaker from the States and then find out it is the incorrect model.
Many thanks
Tony
#6

I just went downstairs and looked behind my Philco 96 highboy.

It uses a Type H speaker, not a Model G. Sorry for the confusion...that's what I get for going from memory.

While a Model G could be used, the speaker plug would have to be changed.

There is usually a decal on back of the speaker frame, in black lettering with a gold background, which reads in part:

PHILCO (this is the PHILCO with lightning bolt trademark)
MODEL H SPEAKER
(some other small type here)
PHILADELPHIA STORAGE BATTERY CO.

The speaker is 10-1/2 inches in diameter.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
trying to identify this wire type
It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM
Gilfillan Brothers Car Radio?
Hi everyone,  Special thanks to Joe Rossi for tracking down this obscure radio and thanks to others who took up the hun...Antipodal — 08:15 PM
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM

[-]
Who's Online
There are currently 2962 online users. [Complete List]
» 2 Member(s) | 2960 Guest(s)
AvatarAvatar

>