Philco 70 Reproduction Cabinet
Posts: 1,402
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
I have been planning to make reproduction Philco 70 and 90 cabinets for quite some time, but with everything that has been going on the past two years, the project has been on the back burner. Well, I have finally found time to get back to the project. I just finished the first 70 cabinet. Here are some pictures.
[Image: https://farm5.staticflickr.com/4370/3654...e227_z.jpg] 105_0788-1 by Steve Davis, on Flickr
[Image: https://farm5.staticflickr.com/4381/3700...9052_z.jpg] 105_0789-1 by Steve Davis, on Flickr
[Image: https://farm5.staticflickr.com/4412/3654...78e7_z.jpg] 105_0790-1 by Steve Davis, on Flickr
The first three 70 cabinets have been spoken for after that I plan to make a 90.
Steve
M R Radios C M Tubes
(This post was last modified: 09-23-2017, 12:13 AM by Steve Davis.)
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Not bad 
Thats just amazing. how the heck did you do it. I need those tools!
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 08-02-2014, 08:49 PM by OldRestorer.)
Posts: 15,835
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Wow. Better than factory.
Ed Coombs is smiling at you in heaven, Steve.
Posts: 5,090
Threads: 270
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
WOW, fantastic! Wish I had half that much talent.
Gregb
Posts: 4,708
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Steve;
Will you be offering a choice between walnut and mahogany veneer in the front panel? Will you also be offering a choice between the grain of the veneer over the arch being vertically or horizontally oriented? I think I found a router bit that closely replicates the profile around the inside of the speaker grille cutouts on those, and on some 1932-33 era Philco consoles, it's a small Powersonic beading bit, I want to try it on some plywood to see what it does.
Regards
Arran
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
--
Ron Ramirez
Ferdinand IN
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Steve, that is just lovely. Kirk, it is not just the tools but the talent to use them. Steve, you are a master of your trade. I could go to Steve's shop and never produce something that perfect or even close.
Best, Jerry
A friend in need is a pest! Bill Slee ca 1970.
(This post was last modified: 08-02-2014, 11:01 PM by jerryhawthorne.)
Posts: 1,402
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Arran, I will offer different options if the customer wants.
I have two original 70 cabinets and one 90 and none of them have exactly the same profile on the edge of the arches. I just had to pick one as a pattern to grind the moulding knives. So, who knows, your bit may be close to some 70. Where did you find the bit?
M R Radios C M Tubes
Posts: 1,402
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Quote: Kirk, it is not just the tools but the talent to use them.
From what I have seen, Kirk does have the talent!
Steve
M R Radios C M Tubes
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Not suggesting Kirk does not have the talent, only I don't! 
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 4,708
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Steve;
I got the bit from a place here called "Midland Tool" , I spotted it one day in their router bit selection and then waited until they had a store wide sale to buy it. It's called a PowerSonic beading bit, but I don't know if the label is exactly accurate, it claims to be 3/4'' in diameter, 7/32'' high, and to have a 3/8'' inch radius, which I assume means that the arc would be formed from a circle having a 3/8'' radius. It was imported by Samona International, Burnaby, B.C., the part number is 38380. I can't speak for the grill of a model 70 or 90 as I don't have one to examine and compare it to, but the profile looks very close to the profile around the inside of the grill of my 60L, and likely an 89L.
Regards
Arran
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Are you going to mark them in some way as reproductions. I can see them turning up on E-Pay being sold as originals (that is a complement).
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 411
Threads: 42
Joined: Sep 2008
City: Ironton Ohio
The cabinet is beautiful but it's also nice to know individual cabinet pieces are available again (I think mr. Oliver may have passed on?) I would have had just another parts cabinet, but thanks to you it will live again.
Posts: 4,708
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I don't really see that as a concern, for one thing the originals, even well kept ones, will have signs of aging and wear. If I am not mistaken they may also have cabinet shop markings such as stamps, not to mention paper labels. To be honest though, unlike the brand Z "Waltons" models there isn't much profit incentive to commit fraud by passing off one of these as a original, particularly when you add up the parts, and matching the correct interior finish, external finish, dirt, aging, most fleabay sellers don't have the know how or the motivation to pull that off.
In fact I doubt whether you would get any more or less for a 90 with a good repro cabinet and finish as opposed to a restored original. Everyone that I have heard of who bought a Dick Oliver 20, 70, or 90 cabinet did so because they had a spare chassis and speaker, or had a complete set with a wrecked cabinet.
Regards
Arran
(This post was last modified: 08-03-2014, 12:51 AM by Arran.)
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
American Bosch Model 802 auto radio
|
| Hello again;
I found a model 838 car radio on Nostalgia Air under United American Bosch, http://www.nostalgiaair.org/...Arran — 09:32 PM |
|
New Philco Repair Bench
|
| Morzh is correct. The repair bench on our website is an archived image of chuck’s original site. He no longer provides s...klondike98 — 05:32 PM |
|
Made mistake & did not label connection
|
| Excellent information. It is all starting to come together now and your explanation really helped since I noticed that ...georgetownjohn — 04:39 PM |
|
Made mistake & did not label connection
|
| Hi John,
I don't have this radio, but I can supply some info:
Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM |
|
New Philco Repair Bench
|
| As far as I know, the Repairbench does not work, and has not been working in a while.
Chuck (we had that campaign looki...morzh — 01:33 PM |
|
Radio city products 664 schematic request
|
| Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM |
|
New Philco Repair Bench
|
| Thanks Gary.dconant — 12:16 PM |
|
New Philco Repair Bench
|
| I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM |
|
New Philco Repair Bench
|
| I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM |
|
Made mistake & did not label connection
|
| It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires.
Why'n't you...morzh — 09:49 PM |
|
Who's Online
|
There are currently 3212 online users. [Complete List]
» 1 Member(s) | 3211 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
