Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
I'm trying to remember the ingredients in the recipe for a rosin solution to dab on a dial string. Been years since I had to make any. Isn't it powered rosin mixed with denatured alcohol?
Thanks,
Art
Posts: 15,832
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Art
Any pure alcohol, that is either grain or isopropyl, and rosin in quantity enough to make the solution yellow.
I used it as a liquid flux for PCBs while a child.
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
Is Everclear alcohol pure enough ? 
Posts: 114
Threads: 2
Joined: Jan 2014
City: Southport NC
Grab a new tac rag and run the cord thru that a couple of times.
Posts: 1,977
Threads: 148
Joined: Jan 2013
City: Westland, MI
Warren don't waste Everclear that way! Cut out a small hole in the stem end of a watermelon and screw that bottle into it! Makes watermelon almost tolerable! Take care, Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 1,191
Threads: 25
Joined: Jan 2014
City: Wellborn Florida
5cc into a orange. For the dial string get 90% Iso from the dollar store mix with rosin. David
Posts: 4,382
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Ever try Rosin from a music store?
Paul
Tubetalk1
Posts: 15,832
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
It is the same rosin. Maybe more expensive.
When I was studying violine in my childhood, all my rosin would eventually go to soldering.
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
You can get a chip from a rosin block for the asking at any music store, a liftetime supply is about $2.00 .
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
I have all the rosin I need. Thank you all.
Posts: 4,382
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
You could always rub up baseballs with it.
Paul
Tubetalk1
Posts: 11
Threads: 2
Joined: Mar 2015
City: Denton, Maryland
(08-15-2014, 05:42 PM)Paul Philco322 Wrote: You could always rub up baseballs with it.
Paul
How about epoxy resin without the hardner ?? damm sticky
Posts: 15,832
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
You do not need sticky. You in fact need something that completely disappears, like alcohol. The idea of rosin solution is that it quickly dries up leaving only rosin as flux. Why would you introduce anything that is not flux and does not disappear?
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 11
Threads: 2
Joined: Mar 2015
City: Denton, Maryland
So soldering flux will work? mixed with alcohol
(This post was last modified: 03-07-2015, 01:20 PM by Pffester.)
Posts: 1,191
Threads: 25
Joined: Jan 2014
City: Wellborn Florida
The stuff used by plumbers is acid flux would destroy your dial string please double check what you have on hand. David
Users browsing this thread: 7 Guest(s)
|
|
Recent Posts
|
|
Philco 60 Squealing
|
| Well, a wave trap is a trimmer in series with the coil so at the resonant frequency it provides a short to ground. This ...RodB — 10:07 AM |
|
Philco 60 Squealing
|
| Rod, My radio is run 7. The wave trap is on that schematic as shown in the picture.
dconant — 09:21 AM |
|
American Bosch Model 802 auto radio
|
| Hi Arran ,
Thanks for your help with this radio.And especial thanks for letting me know to look it up under United Ame...Antipodal — 04:32 AM |
|
Philco 60 Squealing
|
| Usually a wave trap is for keeping IF signals from entering the antenna and from leaving the antenna. You feed an IF sig...RodB — 09:30 PM |
|
Philco 60 Squealing
|
|
I just peaked it for the best signal at 600.
NULL it for IF frequency, originally it would have been null for 500kh...Chas — 08:05 PM |
|
Philco 60 Squealing
|
| Wavetrap no longer matters.morzh — 05:19 PM |
|
Philco 60 Squealing
|
| Rod, I had checked out your suggestions but did not help. I did solder the ground rivets to the chassis as Chas suggeste...dconant — 04:52 PM |
|
37-690 Bass Choke Replacement
|
| Yeah, I know, Mouser and Digikey don't have "big iron" components. For some reason Philco was messing with the...Radiodial — 04:25 PM |
|
37-690 Bass Choke Replacement
|
| Yes, I just had to deal with that while repairing the 37-604 Philco. Exactly that value choke was gone. And the current ...morzh — 03:52 PM |
|
37-690 Bass Choke Replacement
|
| Ah, now where to find one.
I've into this before on smaller sets, I now recall. Hammond makes one that is only rated...Radiodial — 03:27 PM |
|
Who's Online
|
There are currently 5355 online users. [Complete List]
» 2 Member(s) | 5353 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")