Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
No matter where you go, there you are.
Posts: 16,495
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Could be saved.
The chassis is clean.
The cabinet will require some major repair. Like grillwork.
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
What are the holes in the bottom shelf for? Extra possible speakers?
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
A friend I know said he can recall seeing plenty of these lowboys about 20 years ago with perfect grills. Now all we seem to find in my area are the broken ones! At least this is better than the last 95 lowboy I found. The legs were chopped off it and it had a home-made front panel. That's the parts radio I refer to in my earlier post. I wish I had some good wood-working skills and the tools as I would love to start making reproductions of these grills to replace all the broken ones out there.
No matter where you go, there you are.
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
jayce one name to call 
Posts: 4,875
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
I know how to make the grilles but I do not have an original to use as a template, I have a Philco 96 in a 1930 version of a lowboy cabinet so it uses the turned grill bars rather then fretwork.
Regards
Arran
Posts: 1,259
Threads: 32
Joined: Jan 2014
City: Wellborn Florida
Good find, just think what it will take in fifty years to make any of todays modern electonics work. David
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
Just had some excitement with the 95! It was working well until I bumped the cord and then, POW! The plug end shorted out and tripped the breaker! Cut the cord down, put on a better end and brought the unit up on the bulbs after resetting the breaker and there is no permanent harm apparent. Even so, I think I'll just replace the whole power cord as I see other spots in it I don't trust. Put me in mind of my 87 highboy when I first got it. Worked well for a week, then the plug end did a fireworks show for me one day. Oddly, that never tripped the breaker on that circuit and it had a perfect looking cord on it. I think the 95 might start my fall "Replace Those Old Cords" program. 
No matter where you go, there you are.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Art Hoch Wrote:What are the holes in the bottom shelf for? Extra possible speakers?
I don't know, but I do know they are not for extra speakers. I think all 1929 Philco lowboys have those two holes.
--
Ron Ramirez
Ferdinand IN
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
Could be to enhance the bass sound. They made baffles similar to that in speakers later in more recent stereos.
(This post was last modified: 09-09-2014, 02:06 AM by Warren.)
Posts: 120
Threads: 10
Joined: Jul 2011
City: Glendale, CA
Jayce,
That's a pretty nice find to have come from Goodwill.
I'll bet that speaker can be fixed up without too much trouble. I've repaired torn speaker cones with used fabric softner sheets that my clothes dryer uses. It's some kind of tough, very thin cloth-like material. I've used as cement Aleene's Original Tacky Glue to hold it all together. It dries flexible and clear. Works pretty well.
Good luck with your radio.
Tom
(This post was last modified: 09-09-2014, 12:47 AM by Tom Hamilton.)
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Road Trip for a Philco 46-480
|
| Good morning, folks! I’ve finished the cabinet and the electrical restoration, and have detailed those in their respecti...jrblasde — 10:56 AM |
|
Studebaker/Philco AC-2687 car radio
|
| Arran,
Thanks for checking you manuals.
I appreciate that. Let me know what you find.
PhilPdouglaski — 08:46 AM |
|
Studebaker/Philco AC-2687 car radio
|
| I have some car radio service manuals, Riders I think (not to be confused with the big blue binders), so I may see if on...Arran — 01:20 AM |
|
Philco model 40-100
|
| Greetings;
Here is an update, I found a listing on fleabay for a similar chassis to yours, and it has a photo of what...Arran — 12:58 AM |
|
Philco model 40-100
|
| Greetings;
I think I may have found a clue as to what is missing, from a search I made, there is a rear view of the c...Arran — 12:12 AM |
|
Philco model 40-100
|
| I recently acquired a Philco model 40-100 farm (battery) radio. The radio was in very good condition except the red on f...mhamby — 05:59 PM |
|
Studebaker/Philco AC-2687 car radio
|
| Hello, Richard
the radio is an AC-2687 Studebaker model. The Philco model is S -5323 and the chassis p/n is S-5523Pdouglaski — 11:52 AM |
|
48-482 rear panel help
|
| The 48-482 is an AC only set as well, featuring a power transformer. While the transformer shouldn’t get “hot”, it is ye...jrblasde — 11:12 AM |
|
Studebaker/Philco AC-2687 car radio
|
| I gave a Chrysler/MoPar car radio from 1954, it was made by Philco, and it uses two chassis, one has the power supply an...Arran — 11:06 AM |
|
48-482 rear panel help
|
| Hello keithchip. You could make a hardboard back for the set, but make sure you provide plenty of ventilation holes in ...GarySP — 11:04 AM |
|
Who's Online
|
There are currently 2330 online users. [Complete List]
» 2 Member(s) | 2328 Guest(s)
|
|
|
|
 
|
) Anyways, I never made it past the front desk as there was a Philco lowboy there for sale, a model 95! I bought it and decided I could look for computer parts later! A Philco is more important! The cabinet is ok, though the grill is broken (as usual). Electronically, this radio checked out fine except the speaker which has a bad output transformer and the canvas cone is rather damaged. Right now the 95 is working well on the pair of globe 45s that came with it (and fell out on the way home!) and another model G speaker I borrowed from my extra model 87. Hopefully I can either repair the original speaker or I might be able to snag a parts 95 I found last month if the guy is still willing to sell.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
