Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Can anyone identify this Pilot radio?
#1

   

   

   

   
#2

I have not seen one like that
looks like they tarred it and deco it ?
good luck Icon_thumbup
#3

Most unique, I am interested in Pilot as they manufactured in Lawrence, Massachusetts for a while. I have seen mostly large Pilot sets. I let a big one get away at our New England swap meet that had a very neat tuning feel to it, it was a huge table set. no room in the inn.

Good luck with it.

Paul

Tubetalk1
#4

Do you know it's a Pilot for sure? Knobs are similar but not the usual Pilot style knobs. Are there any markings on the tubes, bezel, capacitors, etc. to indicate a Pilot. I was trying to find the word 'Pilot' somewhere but no luck. Of course my eyes aren't what they once were but nothing is jumping out at me.

Craig R.
#5

Hello BrendaAnn,

I've checked my usual sources, but can't find this one. What does it do for a speaker? It appears that there is less here than meets the eye! Icon_e_wink What tubes are in the radio? 8 tubes for a broadcast band radio seems like a lot unless it is a radio/phono combo or it is part of a PA system. Also, I can't recall ever seeing a radio that tunes right to left, i.e., high portion of the band on the left. Interesting. Joe

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#6

Possibly a Pilot T-1584, Vol 11 of Riders. The T-1684 is the same electronically but has push-button tuning. Joe

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#7

Tube complement looks to be 5Y3, 6V6, 6SQ7, 2x 6SK7 or equiv., 6SA7, 6J5 and whatever that eye tube is. It does look like it has a phono input, which is probably what that 6J5 is used for (magnetic pickup?). The T-1684 doesn't look anything like this circuit. That one has a p-p output circuit and series heaters, whereas the radio posted is a transformer set with parallel heaters.

Hopefully once it gets here, I'll find more information somewhere on that chassis..




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM
Philco 38-7 Speaker
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM
Philco 38-7 Speaker
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM

[-]
Who's Online
There are currently 2246 online users. [Complete List]
» 1 Member(s) | 2245 Guest(s)
Avatar

>