Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

fisher 220-t
#1

Have a chance to get a Fisher 220-T, is they anything that I should look out for?
Was this set a very good one or bottom of the line?

I have enough of a problem with the radio and old car bug know the stereo bug?

"HELP"! Icon_shh

Thanks for your help,
Ed.
#2

Hi Ed

I have a 220-T that currently has a dead channel. It worked when I bought it, and sounded good while it was working.

20 watts/channel, not the best, but certainly not the worst.

I haven't worked on mine yet (too many irons in the fire, as always), but I think the outputs are silicon and not germanium, so that would be a plus.

Anyway...if you like the receiver and it is reasonably priced, I say go for it! Icon_thumbup

--
Ron Ramirez
Ferdinand IN
#3

Additionally:

Expect to replace electrolytic caps in the power supply and audio amplifier sections. Not a big deal, no different than recapping a vintage radio, really.

If you are going to work on several receivers, a transistor tester would be a good thing to have. But if this will be your only receiver, than you can get by with the diode checker function of your DMM - or even the ohmmeter function in a pinch. I bought a Heathkit transistor tester that found bad transistors in my Fisher 4400 that were only showing as questionable on my DMM. That 4400 is now on the desk of my home office and is my "daily driver." It uses germanium outputs. But since I replaced all of the electrolytics in the power supply and audio amplifier sections, it should be good to go for several years.

I started working on a Fisher 170 but had to quit when other things came up. I also have a mostly finished 700-T and a partially finished 440-T waiting for me to get back to them. Not to mention the 220-T... Icon_crazy

--
Ron Ramirez
Ferdinand IN
#4

Thanks Ron.

This is on the goodwill web site, I will only bid $20.00 tops as who knows what shap it is in. If I buy it will let you know. Soon our house is going to fall down from to many treasure's.Icon_crazy


Thanks Again,
Ed

I have grammar dyslexia Icon_e_surprised
#5

It must be made out of very rare gold parts. Still two days to go and almost $30.00.
I bid on a Silverstone around 39 vintage and it went for $71.00. Unreal, goodwill?

The hunt goes on.

Ed.
#6

Well, Ed,

Fisher and other stereo receivers are climbing in value as more people become interested in them. I've watched the prices going up in the short period that I've been interested in them. You can expect to pay between $60-130 for a 220-T in really good shape.

Just don't go looking for a higher-end Marantz, Pioneer or Sansui...the prices of these can get really crazy...

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Delco car radio Peko vibrator converstion issues
Rich, There is an Australian website (Cool386.com) that has much useful info regarding repair and restoration of vibr...Joe Rossi — 07:29 PM
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM

[-]
Who's Online
There are currently 3800 online users. [Complete List]
» 3 Member(s) | 3797 Guest(s)
AvatarAvatarAvatar

>