Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Kadette 77 from 1936
#1

Not a special radio by any means. With 7 tubes, counting the ballast, it is a good example of the tube count inflation that the maker was known for. In this case the use of two  43s to drive that little 5 inch speaker was probably a waste. Yet I would rather have ample audio than two or three ballast tubes.

The new speaker cone helps the audio a lot.

[attachment=5885]

The chassis was in good shape. I don't think anyone had ever worked on it. So it got the caps all restuffed and some new rubber wire. All of the tubes except the rectifier were Kenrads, which were probably original.

[attachment=5886]

The cabinet had been smashed in shipping. Now that is something new!

[attachment=5888]

It works pretty good and makes a nice display companion to our Kadette 66 from the same year.

Yeah, it needs a knob.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#2

If this is the chassis after restoration, it looks like factory, as if no one touched it.
My hat's off to you, Russ.
#3

Yes it is. Notice the new cloth covered wire coming out of the filter cap box.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#4

......




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM

[-]
Who's Online
There are currently 4046 online users. [Complete List]
» 2 Member(s) | 4044 Guest(s)
AvatarAvatar

>