12-12-2014, 11:05 AM
Any one out there that has rewired the dial light sockets on the automatic tuning sets? I have one with a couple bad wires that need replacing and thought I'd ask before taking one apart.
Light socket repair
12-12-2014, 11:05 AM
Any one out there that has rewired the dial light sockets on the automatic tuning sets? I have one with a couple bad wires that need replacing and thought I'd ask before taking one apart.
12-12-2014, 11:06 AM
Looks like the socket that lights the dial/band indicator needs it as well.
12-12-2014, 05:41 PM
I don't believe this is quite what you're asking about but Ron did a pilot lamp rewire in the tech section, maybe part if it will help...
12-14-2014, 01:30 AM
Thank you Bob that did help
![]()
12-26-2014, 06:06 PM
The rewiring went perfectly thanks to the pilot lamp rewire by Ron. The hardest thing was finding the correct plastic washers locally.
12-26-2014, 06:43 PM
![]()
01-02-2015, 10:17 PM
I found a source for the #6 plastic/ nylon washers, ACE Hardware has them.They are 0.11 apiece.They are in the pullout
trays in the single nut/bolt and washer section.
01-03-2015, 02:19 AM
(01-02-2015, 10:17 PM)doug-5er Wrote: I found a source for the #6 plastic/ nylon washers, ACE Hardware has them.They are 0.11 apiece.They are in the pullout That's great! I have an Ace Hardware close by. Lowe's only had 5 of them and they were much more. I was waiting for them to get a new shipment in.
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s) |
![]() |
![]() |