Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My Philco 38-2 in process of restoration
#1

Where here is a link to the restoration of my Philco 38-2, still needs a lot of work but at least it looks better than it did.

http://community.webshots.com/album/471240774XGwWFD

Icon_lol
#2

Your Philco will look Phantastic when it's Phinished.

Keep these Phrequent "in progress" Photos Phlowing....



Philco #2 Guy 8)
#3

Thanks Chuck, today I worked on getting the stain that had weeped under the tape tided up. I probably paid too much initially for this radio, but in the scheme of things that has worked out with other radios but it is a nice stately looking Philco. This is the only 38-2 I have ever seen on ebay and either people think they are "butt ugly" or there are not too many out there. Started doing the sanding lacquer also so I will be sure to take some more pics along the way so that people can see that it isn't really that bad to tear into the cabinet restoration. My wife is trying to make up her mind if she wants the 38-2 or the 38-116 in the family room, I think I will swap them when I decide to get the 116's chassis restored and put it back when that is done.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently no members online.

>