Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I just finished the chassis inside this radio:
[Image: http://www.philcoradio.com/images/phorum...88_058.jpg]
It's too cold here to start doing any cabinet work yet, but I wanted to show you what the cabinet of this radio looks like and also illustrate many of its problem areas.
First of all, I should mention that there should be small wood blocks inside the cabinet, which the tops of both dial scales should be screwed onto to hold them in place. These blocks are missing inside the cabinet. This should not be a big deal to reproduce.
It's the many faults in the veneer that is going to be the problem.
Looking at the left side, you will notice many "fleabites" along the edge.
[Image: http://www.philcoradio.com/images/phorum...88_059.jpg]
The right side has even larger places where veneer is missing:
[Image: http://www.philcoradio.com/images/phorum...88_060.jpg]
Top right, above the right "spread-bands" dial: Notice that not only is a chunk of top layer veneer is missing, but the substrate is gone as well:
[Image: http://www.philcoradio.com/images/phorum...88_061.jpg]
And...the entire strip of decorative tiger-stripe walnut, with the grain running vertically, is missing above both dials and the speaker grille opening:
[Image: http://www.philcoradio.com/images/phorum...88_062.jpg]
I was going to seek help in repairing this cabinet from one of the fine artisans here on the Phorum, but with me still out of work, I think I am going to have to tackle it myself.
I am open to suggestions. 
--
Ron Ramirez
Ferdinand IN
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
One word
KIRK.
Say the word boss I'll muscle him over
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Yeah, Kirk will probably trade chassis work for cabinet work.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Wow, Kirk is awful quiet 
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 15,811
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
Psst....He owns the housssssse......
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
C'mon Kirk! Wake up!
:-)
Work is knocking at yer door!
Chuck
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Posted by morzh - Yesterday, 10:32 pm
Psst....He owns the housssssse......
no the house owns him 
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
ME!!!! QUIET!!! NEVER!!!
Send it over and I will veneer it for you.
The house is sucking up my time but I am moving in already a little at a time. Tonight is drinking night and updating my posts, 
P.M. me for my address and I'll get it done when I can... After Mikes nightmare cabinet!. Cant tone or anything due to winter but can do the veneer.
Happy Thursday Boys and Gal, 
P.S. Why always me? What about Steve or Todd or Russ,
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 01-30-2015, 06:02 AM by OldRestorer.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Kirk
Seriously?!?
Wow...thanks ! Yes, to be honest, I think I would rather do the toning/finishing myself. Even though I think you would do a better job at it than I would, just repairing the veneer issues would be a big help.
I'll have to have some custom decals made for this cabinet. I'm not going to use the currently available decals for this one as they are not to my liking. Yah, I'm being picky.
--
Ron Ramirez
Ferdinand IN
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
WHAT ??? 
the boss asks once and you jump to it
poor mike has to do all your stinky chassis and drink your moldy beer
just so you can do a few small cabinets for him
and I drank same moldy beer no Chinese and you still will not do my cabinets
well of all the nerve
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Sam, You know you can drop off a cabinet any time!
Mikes cabinets are small?
What are you smoking?
Don't worry Mike, yours have priority and Now there is less chassis for you to fix!
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
You guys are making me feel bad. 
--
Ron Ramirez
Ferdinand IN
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Oh stop Ron,
What is the fun of the hobby if you cant ruin someone elses cabinet.. I mean restore,
Besides, I get to say that I restored a cabinet for the famous author; Ron Ramirez!
We made a fair deal Sam, He is letting me restore it if I pay shipping both ways
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
kirk
Besides, I get to say that I restored a cabinet for the famous author; Ron Ramirez!
We made a fair deal Sam, He is letting me restore it if I pay shipping both ways [Image: http://philcoradio.com/phorum/images/smi...rgreen.gif]
 using ron to get famous  
ron all in good fun don`t take it serious please
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Users browsing this thread: 7 Guest(s)
|
|
Recent Posts
|
|
Shadow Meter Bulb
|
| Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM |
|
Philco 41-608 changer coupler
|
| 3D-printing...short of machining, of course.
Or molding.morzh — 05:20 PM |
|
Philco 41-608 changer coupler
|
| Thanks, Morzh.
That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM |
|
12' Philco
|
| If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel.
Kareem would have an e...morzh — 01:48 PM |
|
12' Philco
|
| And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM |
|
Hickok AC51 tube tester
|
| I think they have only shown the secondaries of the transformer.
Two of them feed the rectifiers' filaments.morzh — 12:58 PM |
|
IF can wire size and Rubber mounts?
|
| Arran
If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM |
|
12' Philco
|
| Rod,
Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently.
H...morzh — 12:54 PM |
|
Hickok AC51 tube tester
|
| Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM |
|
IF can wire size and Rubber mounts?
|
| Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM |
|
Who's Online
|
There are currently 5399 online users. [Complete List]
» 2 Member(s) | 5397 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
