Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What should I do here?
#1

Ok so you all know I got that 45 butterfly and rebuilt it. Mike did my chassis and she looks good and plays great.

I recently came into another 45 cabinet only. It is complete and just needs a new finish. The one I restored had nothing salvageable but the top molding from the top, Front was dead except for the veneer but I had a good bottom good grill cloth, and ok sides.

The only issue as I found out now from looking at the new cabinet is that someone cut the bottom front molding of my rebuilt one flat and it should have a 45 degree angle to the floor. 

My dilemma is this, do I take my chassis and put it on the new cabinet or leave it in  the one I already re-did?

The original one is a half new cabinet so I think something all original would be better and I could sell or trade the rebuilt cabinet.

What do you guys think?

Keep the old rebuilt?
Go with the all original?

Kirk


Attached Files Image(s)
                   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

Keep the cabinet that you like the best...

I typically prefer all original, but have kept a couple of cabinets I have redone because they turned out nice and I had a personal attachment to them.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

Hmmmmmm,

I do have a little attachment but I, like you love original.....

If I could make the choice I would ask here Icon_lol

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

kirk
keep all original one
sell other at ktown
sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#5

Think anyone will have interest in a half new cabinet?

Hmmm, $10.00 in wood and veneer, $25.00 for the cabinet and $500.00 in labor Icon_lol

Oh and dont forget it fell off the table after photographing it so it has a little dent and a few chips... Icon_rolleyes

Anyone interested, Icon_lol

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

I would keep the one that you spent all the time to recreate intact.  After all, that is something to be proud of.  Put the other cabinet on the shelf for the time being until another chassis comes along or you get a good deal on a parts radio.  Then make another nice radio out of the two.  Once finished, keep them both or sell the one that you have the least attachment to.  Just my thoughts.

Craig R.
#7

Original, to me .. is always nice.
#8

I think I once saw a chassis of a 45 sold on its own.
You might be able to put together one more 45 and those go for a pretty penny.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#9

Others have suggested that you keep the cabinet that you like the best...and I agree.

Model 45 and model 28 (the AC/DC version) come up for sale every so often. Keep an eye out for one, and then you can let go of the complete set that you like the least.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM

[-]
Who's Online
There are currently 2745 online users. [Complete List]
» 3 Member(s) | 2742 Guest(s)
AvatarAvatarAvatar

>