Posts: 4,369
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
While scrolling around the Attic Archives I came across a Philco lookalike, which came first? Anyway my question is about Rola. was Rola the speaker division of Detrola? I never saw the connection with the names until tonite, I know dim pilot bulb I am.
btw beware if you go to the Detrola site frequently googled up, it is on Tripod and has many threats to your computer. i am sure they are not intentional but Norton goes wild when I hit that site.
Here is the lookalike..i have seen a Philco styled like this, I thinks.
http://www.radioatticarchives.com/radio.htm?radio=5420
Paul
Tubetalk1
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Yep looks like one of the 66-s.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 03-21-2015, 08:17 PM by morzh.)
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Rola was just a speaker manufacturer as far as I know, much like Utah or Quam Nickels, I've seen their speakers used in a bunch of different makes and models not just Detrola. Besides that Detrola was really not a large enough manufacturer to have bought out a speaker manufacturer, or made their own. Or were you thinking that the 'rola portion of Det-rola had something to do with the speaker company? I think that ending a radio or phonograph manufacturer's name in 'olla was just something that began in the early days of gramophones and carried on longer then it needed to, like Victrola, Graphonola, Phonola, Radiola, Audiola, since Detrola sets were made in Detroit they just dropped the "it" and added "la".
Yes the styling of that set is very similar to that of a Philco 60MB or 66MB, but was likely inspired by the Philco models rather then the other way around. Philco used their own stylists that they had in house but also hired outside stylists like Norman Bel Geddes to design cabinets, Detrola may have done the latter but more then likely they just hired an outside cabinet/furniture company to design and produce the cabinets for them.
Dennis Smith (Mr Detrola) may know for sure what they did over at Detrola, he apparently had an Aunt that worked for the company hence his person interest in the history and products of the firm, but most of the small and mid sized radio manufacturers did not have their own cabinet shops and contracted out. They would go to a cabinet company and if they did not have something that was already available off the shelf the cabinet company would submit a few designs for the radio manufacturer's approval, which they would then build.
Regards
Arran
(This post was last modified: 03-22-2015, 03:50 AM by Arran.)
Posts: 4,369
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Thanks for the perspecitive and info.
Paul
Tubetalk1
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Also Motorola.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
(03-22-2015, 04:01 PM)morzh Wrote: Also Motorola.
Can't forget Motorola, who's original company name was Galvin Manufacturing Company, their original line of business was to manufacture radios for cars, hence the name "Motor-ola". Then they got into portable radio equipment like for taxi cabs, and cop cars, then they developed the Handi Talky during the war. Unfortunately they were bought by Poohgle, who really knew nothing about manufacturing hardware, so they broke it up and sold off parts of Motorola to some Korean and Chinese purveyors of junk electronics, except for those parts the U.S government forbade them to sell for security reasons.
Regards
Arran
Posts: 114
Threads: 2
Joined: Jan 2014
City: Southport NC
Posts: 4,369
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Users browsing this thread:
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
Who's Online
|
There are currently 4000 online users. [Complete List] » 3 Member(s) | 3997 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|