Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Rola Detrola
#1

While scrolling around the Attic Archives I came across a Philco lookalike, which came first? Anyway my question is about Rola. was Rola the speaker division of Detrola? I never saw the connection with the names until tonite, I know dim pilot bulb I am. 

btw beware if you go to the Detrola site frequently googled up, it is on Tripod and has many threats to your computer. i am sure they are not intentional but Norton goes wild when I hit that site.

Here is the lookalike..i have seen a Philco styled like this, I thinks.

http://www.radioatticarchives.com/radio.htm?radio=5420

Paul 

Tubetalk1
#2

Yep looks like one of the 66-s.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

 Rola was just a speaker manufacturer as far as I know, much like Utah or Quam Nickels, I've seen their speakers used in a bunch of different makes and models not just Detrola. Besides that Detrola was really not a large enough manufacturer to have bought out a speaker manufacturer, or made their own. Or were you thinking that the 'rola portion of Det-rola had something to do with the speaker company? I think that ending a radio or phonograph manufacturer's name in 'olla was just something that began in the early days of gramophones and carried on longer then it needed to, like Victrola, Graphonola, Phonola, Radiola, Audiola, since Detrola sets were made in Detroit they just dropped the "it" and added "la".
 Yes the styling of that set is very similar to that of a Philco 60MB or 66MB, but was likely inspired by the Philco models rather then the other way around. Philco used their own stylists that they had in house but also hired outside stylists like Norman Bel Geddes to design cabinets, Detrola may have done the latter but more then likely they just hired an outside cabinet/furniture company to design and produce the cabinets for them.
 Dennis Smith (Mr Detrola) may know for sure what they did over at Detrola, he apparently had an Aunt that worked for the company hence his person interest in the history and products of the firm, but most of the small and mid sized radio manufacturers did not have their own cabinet shops and contracted out. They would go to a cabinet company and if they did not have something that was already available off the shelf the cabinet company would submit a few designs for the radio manufacturer's approval, which they would then build.
Regards
Arran
#4

Thanks for the perspecitive and info.

Paul

Tubetalk1
#5

Also Motorola.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

(03-22-2015, 05:01 PM)morzh Wrote:  Also Motorola.

Can't forget Motorola, who's original company name was Galvin Manufacturing Company, their original line of business was to manufacture radios for cars, hence the name "Motor-ola". Then they got into portable radio equipment like for taxi cabs, and cop cars, then they developed the Handi Talky during the war. Unfortunately they were bought by Poohgle, who really knew nothing about manufacturing hardware, so they broke it up and sold off parts of Motorola to some Korean and Chinese purveyors of junk electronics, except for those parts the U.S government forbade them to sell for security reasons.
Regards
Arran
#7

Nice history of Rola. Pretty interesting

http://www.historylink.org/index.cfm?Dis...le_id=8923
#8

Thx. Jim.

Paul

Tubetalk1




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM

[-]
Who's Online
There are currently no members online.

>