AWSOME MARCONI 136/Restored Finished
Posts: 765
Threads: 147
Joined: Aug 2012
City: Dallas, TX
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Don't try stripping that escutcheon Fred, it has a faux finish on top of it, just clean it with Gojo, touch it up, and maybe clear coat over it with lacquer if you need to, not sure about the one for the pushbuttons. I don't know what to suggest with the Marconi decal, I'm not sure if Radio Daze carries those or not, I'm guessing that they don't and I don't know who else would make them. You may have to strip around it very carefully if you want to preserve it, then lightly sand it and clear coat over it.
With regard to the electrical end, these sets usually have a pair of bias cells under the chassis, so you may have to figure out a substitute, or make circuit modifications to get that extra -1.5 volt bias. I'm not sure about this model but I have a Marconi model 157, and it has some rubber wiring, including on the power transformer. The speaker was made by Utah I believe, in spite of the decal, Marconi did not manufacture their own speakers, neither did Rogers for that matter.
Regards
Arran
(This post was last modified: 05-12-2015, 01:05 AM by Arran.)
Posts: 765
Threads: 147
Joined: Aug 2012
City: Dallas, TX
Thanks Arran for the heads up , I did notice the escution was photo finish ![Icon_eek Icon_eek](https://philcoradio.com/phorum/images/smilies/icon_eek.gif) never seen that before on parts and very happy that nothing is wrong with to speak off. I can make a decal here at home if I have to with photo shop on my computer using decal paper. The escution isn't warped in any way must be made out of baklite. Dick Morgan will supervise and direct me on all electrical work. He is a master and is handing down what he can to help me restore my radios
Posts: 370
Threads: 102
Joined: Jul 2011
City: Calgary, AB, CA
Since I live in Canada, I think you should send me that radio.. I have some Marconies , but the model 136/37 is a very nice one. The wood in the cabinets on those is very nice.. Fred, if You need the schematics for it , I have the Marconi book, which also has the dial string drawing and cap values. The radio takes a 6u5 eye tube and there is a bias cell for the grid of the 6f6.
I have always used a AG 13 1.5 volt battery for the bias cell.
show us photos after the cabinet is done..
Dan in Calgary...
Living in Calgary Alberta
Posts: 765
Threads: 147
Joined: Aug 2012
City: Dallas, TX
Posts: 384
Threads: 22
Joined: Mar 2015
City: Waxahachie, TX
Posts: 765
Threads: 147
Joined: Aug 2012
City: Dallas, TX
(05-16-2015, 10:12 PM)Crist Rigotti Wrote: Very nice Fred!
Tank u / Hay Crist, good seeing ya again today at swap meet , hay take a look at my favorite Philco that I restored awhile back, it is awesome and I still have it in my collection . Go to search on this website and look up 23x and you will see the pictures of it, it is a very rare set. Don,t fall down when you see it.
(This post was last modified: 05-16-2015, 11:04 PM by Fred Taylor.)
Posts: 384
Threads: 22
Joined: Mar 2015
City: Waxahachie, TX
(05-16-2015, 10:35 PM)Fred Taylor Wrote: (05-16-2015, 10:12 PM)Crist Rigotti Wrote: Very nice Fred!
Tank u / Hay Crist, good seeing ya again today at swap meet , hay take a look at my favorite Philco that I restored awhile back, it is awesome and I still have it in my collection . Go to search on this website and look up 23x and you will see the pictures of it, it is a very rare set. Don,t fall down when you see it.
Nice seeing you too!
You sure can find some unbelievable radios! That 23X is sweeeet!
Crist
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
Who's Online
|
There are currently 4119 online users. [Complete List] » 1 Member(s) | 4118 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|