Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Tropic 42-788
#16

4+ months later...

I am working on Rons radio.

I am repairing all the veneer issues and cant seem to find a great match. On the left side is a nice wavy walnut pattern but on the right is a plain strait-grained veneer.

Do you guys think that is factory? to have 2 unmatched veneers?

Next is the front trim. There is no veneer so you can see the glued layers. I dont think it was ever veneered.

Do you guys think I should veneer it?

Mainly I need to know what veneer you guys think is a good match. If I have to fully replace both sides thats fine.

of course Ron is the deciding factor but recommendations are welcome.

Kirk


Attached Files Image(s)
           

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#17

They figured, in tropics it won't matter, there are more important things, like savages, malaria and heat, who cares about matching veneer. Icon_lol

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#18

I'm sorry, Kirk...I never did take pictures of my similar 41-788...I really need to do that. It has some nice veneer.

And there should be veneer on top front (your last photo), where there currently is none.

I'll try to remember to take the photos this evening...

--
Ron Ramirez
Ferdinand IN
#19

Finally...some photos of my 41-788, for comparison.

[Image: http://www.philcoradio.com/images/phorum..._00007.jpg]

[Image: http://www.philcoradio.com/images/phorum..._00008.jpg]

[Image: http://www.philcoradio.com/images/phorum..._00002.jpg]

[Image: http://www.philcoradio.com/images/phorum..._00003.jpg]

--
Ron Ramirez
Ferdinand IN
#20

...more pics...

[Image: http://www.philcoradio.com/images/phorum..._00004.jpg]

[Image: http://www.philcoradio.com/images/phorum..._00005.jpg]

[Image: http://www.philcoradio.com/images/phorum..._00006.jpg]

Arran could probably tell you the exact species of walnut veneer. It looks like two types were used - a somewhat plain type on the top, a somewhat fancier type on the sides and front.

The 41-788 cabinet differs from the 42-788 in that the half-round "columns" to the left and right of the speaker opening are also painted with black lacquer on the 42-788, not veneered with fancy veneer as on the 41-788.

Kirk, if you need larger photos, let me know...

--
Ron Ramirez
Ferdinand IN
#21

And here are a couple of links, which show that the veneer on the 42-788 appears to be the same types as used on the 41-788.

http://antiqueradios.forum5.info/t362-ph...grillcloth

http://www.radioatticarchives.com/radio.htm?radio=2073

Having seen these, now I know what kind of grille cloth to use once this cabinet is redone...Icon_thumbup...the same type as I used in my 41-758EZ.

--
Ron Ramirez
Ferdinand IN
#22

Learn something new every day Icon_clap
#23

Weird, The above photo shows the same issue. The left side is curvy and the right side is strait grained...

Im looking for a match right now. I may have a good match in my salvage pile....

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#24

 I think that I would just reveneer both shoulders of the cabinet with some book matched pieces of French walnut, any cut will do but maybe straight cut, sure they didn't at the factory but you might as well do it right now that there is a reason to fix it. Also the missing vertically grained veneer above the dials and speaker looks like orientalwood veneer, the stuff they used to use on the front arch on Philco 90 and 70 cathedral cabinets. The sides look like quarter sawn French walnut veneer, something Philco really liked to use on many of their cabinets between 1937 and 42, notice how it has a very straight and parallel grain. Speaking of Orientalwood veneer I should really see if I can locate some, same with some Sapele or Etome (whichever it is), the latter two are African hardwoods look much like mahogany but not quite.
Regards
Arran
#25

Arran - thanks for chiming in with the proper species of veneer for this set. I really appreciate your help! Icon_thumbup

--
Ron Ramirez
Ferdinand IN
#26

Ron, see if you like this veneer

http://www.constantines.com/search.aspx?...nch+walnut

Oriental

http://www.ebay.com/itm/Oriental-Wood-ve...5af9a7e5d2

Me

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#27

If you need some Orientalwood veneer, I can fix you up. I have accumulated a lifetime supply.

 When searching for Orientalwood, look for Australian walnut also. They are one and the same.

Steve

M R Radios   C M Tubes
#28

I agree with your choices, Kirk. Steve, do you concur? Now that you're here in this thread I would be most interested in hearing your opinion.

I think the place in Louisville is where Steve gets his veneer. So far I haven't really needed any veneer for any of my projects, but it is good to know that I can acquire some not far away. (Louisville is only an hour or so away from me.)

The French walnut looks perfect for the top. It might be okay for the sides as well, since I believe you are only patching missing veneer on the sides at the back edges, correct, Kirk?

Just think, when this cabinet is done it will look better than my 41-788...but my 41-788 does retain its original finish...too bad it has that chip out of the Oriental veneer above the speaker...

--
Ron Ramirez
Ferdinand IN
#29

Patching seems best for the sides.

Steve, Throw me a PM for the veneer, I need a few pieces 11"x4"

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#30

GAW, Ron, that is a NEAT lookin' set.  Icon_thumbup Icon_thumbup

(note to self: NO Philco Tropic radios for you, you have ENOUGH....... no no no.... uh, maybe)




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM

[-]
Who's Online
There are currently 4008 online users. [Complete List]
» 1 Member(s) | 4007 Guest(s)
Avatar

>