Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 90 original finish preservation
#1

So I purchased my beautiful model 90 with its original finish. The previous owner said that all he did was wipe the cabinet with lemon oil. It has the normal aged lacquer cracking to it but it's in great shape. I'm wondering what is the best way to preserve and protect the original finish? Is there a curtain product that will keep the finish from breaking down any further?
#2

I have sometimes used a penetrating oil finish on aged lacquer: thinned varnish, boiled linseed oil, tung oil, Minwax "Antique Oil," there are many. Occasionally I've heated the surface with an infrared lamp to aid penetration. Any oil remaining on the surface is wiped off before it sets.
#3

(07-09-2015, 08:03 PM)Alan Douglas Wrote:  I have sometimes used a penetrating oil finish on aged lacquer: thinned varnish, boiled linseed oil, tung oil, Minwax "Antique Oil," there are many.  Occasionally I've heated the surface with an infrared lamp to aid penetration.  Any oil remaining on the surface is wiped off before it sets.
Very very intresting Icon_wtf
#4

Maybe try Kramer's Antique Improver:

http://www.kramerize.com
#5

^^I haven't tried that product yet but I was just reading over at the other joint about it. Sounds like a good product.




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM
12' Philco
Rod, Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently. H...morzh — 12:54 PM
Hickok AC51 tube tester
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM
IF can wire size and Rubber mounts?
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM
Hickok AC51 tube tester
Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM
IF can wire size and Rubber mounts?
A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM
My last cabinet for this year
Hello Dan, That is really beautiful what great looking radio you have ! I have friends who live in Calgary and the wea...radiorich — 01:51 AM

[-]
Who's Online
There are currently no members online.

>