Posts: 155
Threads: 25
Joined: Sep 2014
City: Folsom, CA
Is it common for these push-pull sections to have the actual wiring reversed from the schematic?
So if you look at the schematic the Black and Black/White wires go to the lower tube. Mine has the White and Blk/Wht wires going to the top tube.
Looks like factory runs and solder before I got in there.
Thoughts?
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
My thoughts, not to worry, it makes no difference.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 15,811
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
I think it is not important.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
The only thing I can think of is if the set has negative feedback wrapped around the output stage it may make a difference. I would leave it the way it was factory wired.
Terry
Posts: 155
Threads: 25
Joined: Sep 2014
City: Folsom, CA
Leaving it
Posts: 347
Threads: 34
Joined: May 2007
City: Raleigh, NC
Supposedly there were color standards for chassis wiring in those days, but each of the pre-war Philcos I've worked on goes its own way.
John Honeycutt
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Agree, if you have wo radios playing in the same room and they are not in the same "phase" it will sound strange as when you mis wire a set of stereo speakers. Actually, nobody woried about this way back then, so that's the story as I know it.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
