Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Early 30's Brunswick
#1

Are these good radios? I've had a Brunswick crank phonograph for over 40 years and know they had their own record label, but have no knowledge about the quality of their radios. I'm guessing they didn't sell that many in the '30-'31 time frame. Thoughts?
Steve
#2

Some of the Brunswick sets are pretty interesting with features like turret tuning, tone controls that change dial colors, unique cabinet designs, etc. :

[Image: http://i55.tinypic.com/ekj08w.jpg]

[Image: http://i56.tinypic.com/keu1z6.jpg]

Picture credits to Dale Davenport.

I have the same radio in a consolette cabinet (model 12A):

[Image: http://i286.photobucket.com/albums/ll118...ck-12A.jpg]
Picture credit to Bill Smith.

So my answer is yes, depending on the model, Brunswick made some pretty cool radios!

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

John,
Yes, I really like the cabinets too! Unusual looking chassis with most of it covered in what looks like aluminum. I'm guessing they weren't one of the biggest radio sellers at that time.....
Steve
#4

So John,
Any potmetal in it?? How do you control the volume??

Terry
#5

Terry, the large outer knob is tuning and the smaller center knob is volume & tone.  CW/CCW for volume and in/out for tone.  As you move the tone in/out the dial changes color... red - yellow - green.

I didn't notice any pot metal, but it has been a long time since I was in mine, but since it still seems to tune OK there may not be any at all.



[Image: http://antiqueradios.com/gallery/main.ph...alNumber=2]

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Mike; I've only run into a speaker with an open filed coil twice, and they were on newer speakers from the 1940s. One ...Arran — 12:48 AM
An attempt to remove the Field Coil from a G speaker
Arran Yes, this is my plan for now and what do I got to lose, this is not even the speaker from this radio, but one o...morzh — 10:44 PM
An attempt to remove the Field Coil from a G speaker
Mike;  I would unwrap the field coil, and see if maybe there a break near one of the ends, like where the coil wire att...Arran — 10:23 PM
An attempt to remove the Field Coil from a G speaker
...and this is what I did. I fed a little LT into the screwholes with a small brush, and a little on the rim next to the...morzh — 09:52 PM
Philco 40-120C Restoration
I combined the two 40-120C threads together as we like to keep the discussion of the same radio together. It helps with...klondike98 — 09:36 PM
Philco 40-120C Weak, Distorted Ouput
Just checked were I buy tubes price is four dollars. So living in Florid we have a local source for tubes. David    David — 09:14 PM
Philco 40-120C Weak, Distorted Ouput
The higher voltage may be due to higher mains voltage. My mains run 120-125AC when the set was new mains would be 110-11...David — 09:09 PM
Philco 40-120C Weak, Distorted Ouput
Thank you for your reply. I pulled a speaker from a Philco 41-221 and received the same result. I used a signal tracer t...bluecap — 08:45 PM
Philco 40-120C Weak, Distorted Ouput
Have you tried a different speaker? How did you trace the distortion? How do you know it is weak? What is the reference?...morzh — 08:33 PM
Philco 46-480 Electronic Restoration
Amen to that! Every time I think I’ve captured them all, I realize that there’s another error. My goal is to finish with...jrblasde — 07:00 PM

[-]
Who's Online
There are currently no members online.

>