1939 Stromberg Carlson 430-H Restore on YouTube
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
08-15-2015, 01:39 PM
(08-15-2015, 12:30 PM)sam Wrote: buz
hmm what happen to 1157 ?
great video as always ![Icon_clap Icon_clap](https://philcoradio.com/phorum/images/smilies/icon_clap.gif)
that screw driver is that for the philco centric cone alignment
if so can I get a close up of it
thanks sam
Its always been 1151...
I believe I did make that for my philco 38-7..Just used a dremel tool to make it
Dont remember if it worked that well..
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
(08-15-2015, 12:54 PM)Eliot Ness Wrote: Another great video Buzz!
You sure are getting a lot of use out of that pencil sharpener ![Icon_wink Icon_wink](https://philcoradio.com/phorum/images/smilies/icon_wink.gif)
yes i am
Posts: 384
Threads: 22
Joined: Mar 2015
City: Waxahachie, TX
I like the way you tap that pencil! With authority!
Crist
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
(08-16-2015, 12:00 AM)Crist Rigotti Wrote: I like the way you tap that pencil! With authority!
Yes...My sharp pencil gives me super powers..haha...buzz
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
Hello Phorum:
Part 8 of my 1939 Stromberg Carlson 430-H series now uploaded.
A link below is for anyone interested...thanks
https://www.youtube.com/watch?v=ZDS6KNOZxuo
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
Hello Phorum:
Part 9 of my 1939 Stromberg Carlson 430-H series now uploaded.
A link below is for anyone interested...thanks
https://www.youtube.com/watch?v=cI5PrJYtfw4
Posts: 2,570
Threads: 336
Joined: Jun 2013
City: lawrenceville nj
great work so far ![Icon_clap Icon_clap](https://philcoradio.com/phorum/images/smilies/icon_clap.gif) keep them coming thanks for posting
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 3,122
Threads: 57
Joined: Apr 2011
City: Lexington, KY
I've read mixed reviews on the Peel and Stick veneer so it will be interesting to see how well it holds up for you.
Clever movie tie-in with Dickel and I also enjoyed the bumper sticker!
Thanks again Buzz!
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
(08-30-2015, 12:24 PM)Eliot Ness Wrote: I've read mixed reviews on the Peel and Stick veneer so it will be interesting to see how well it holds up for you.
Clever movie tie-in with Dickel and I also enjoyed the bumper sticker!
Thanks again Buzz!
thanks Eliot for your support...buzz
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
(08-30-2015, 12:24 PM)Eliot Ness Wrote: I've read mixed reviews on the Peel and Stick veneer so it will be interesting to see how well it holds up for you.
Clever movie tie-in with Dickel and I also enjoyed the bumper sticker!
Thanks again Buzz!
I've never read any reviews about peel an stick veneer, but I can imagine three obvious potential problems give what happens to other peel and stick products.
(A) The glue will ooze out or off gas from time to time causing problems with the finish.
(B) The glue will dry out causing the veneer to detach itself.
© The glue will allow the veneer to shift around with changes in heat and humidity.
Aside from those, and given the situation with paper backed veneer, the selection of different cuts and species will be limited to the more common types.
Regards
Arran
(This post was last modified: 08-31-2015, 03:37 AM by Arran.)
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
Hello Phorum:
Part 10 of my 1939 Stromberg Carlson 430-H series now uploaded.
A link below is for anyone interested...thanks
https://www.youtube.com/watch?v=YyueqFODBbA
Posts: 3,122
Threads: 57
Joined: Apr 2011
City: Lexington, KY
Coming along quite nicely Buzz. Your flocking sure turned out nice as did the trick with the gold Sharpie. Your videos are a great mix of humor and technical.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 2,570
Threads: 336
Joined: Jun 2013
City: lawrenceville nj
buzz
who`s the blonde singer on last video
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 384
Threads: 22
Joined: Mar 2015
City: Waxahachie, TX
(09-12-2015, 02:19 PM)sam Wrote: buzz
who`s the blonde singer on last video
sam
Betty Hutton
https://www.youtube.com/watch?v=ClGNm89GZBE
Crist
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
Hello Phorum:
Part 11 and FINAL part of my 1939 Stromberg Carlson 430-H series now uploaded.
A link below is for anyone interested...thanks
https://www.youtube.com/watch?v=1wNGFOShNms
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
Who's Online
|
There are currently no members online. |
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|