Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco with Phono input
#1

Sometime in the 1950's I was given what I think was a Philco radio that had an RCA phono jack on the side. This was connected to a Webcor 78 changer, which I still have. The radio is since long gone, but as I remember, it was in a vertical cream color plastic case and had a carry handle.
I have not been able to find any reference to this radio, and it may not have been a Philco. Any info would be appreciated.
Thanks
Thom
#2

You might want to check the pictures in the Philco Gallery to see if you recognize your radio (it is organized by years):

http://www.philcoradio.com/gallery/

If you don't see it there and it might be a different brand you can try combing through Radio Attic's archives:

http://www.radioatticarchives.com/

Good luck!

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

 It sounds to me like the set you remember was retrofitted with an RCA jack, even with companies that included a phone input it was not typical to add it through the side of the cabinet, usually through the back.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 979 online users. [Complete List]
» 1 Member(s) | 978 Guest(s)
Avatar

>