Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Which transitone model is this?
#1

What model is this one, and what would be a reasonable price for one like it? I kind of like the mid-century styling on it. It's a nice chunk of wood.


Attached Files Image(s)
   

Charlie in San Antonio
#2

So what does the stamp on the chassis say?? 42 PT3 striped.

Terry
#3

It's an EBay listing and the pictures don't show the stamps.

Charlie in San Antonio
#4

+1 what Terry said.

http://www.philcoradio.com/gallery/1942b.htm#f

The cabinet was originally covered in photofinish, and the eBay set has had all of its photofinish stripped off.

p.s. It isn't Mid Century - it's from 1942.

--
Ron Ramirez
Ferdinand IN
#5

Thanks. That makes me like it a bit less, though. There are two on EBay right now and both have no Photofinish. Both seem way overpriced for an AA5 set without original finish (it IS an AA5, right?).

Charlie in San Antonio
#6

YEP

Terry
#7

If you can get it to play well and still like the naked look then it is a good little set.

Paul

Tubetalk1
#8

I DO like the naked, blonde wood look (that and the lines made me think "mid-century"), but the two on EBay right now are going for $89 and $125. I think I will wait for a more reasonably priced one.

Charlie in San Antonio
#9

 In my opinion I would NOT pay anymore then maybe $20-25 for an electrically unrestored one with a good original finish, I wouldn't pay more then maybe $10 for a stripped and varnished one like the one shown. I don't really find them that attractive, with or without the Philcote faux finish, they are just uninspired looking.
Regards
Arran
#10

$20 delivered.
#11

You know what a good alternative might be? A PT 7. Similar style but no faux finish to contend with at all.
Fairly simple case to work on and done right they can look great. One of my first Philcos and I still use it often.
And they can be found for not a lot of $
#12

This why bakelite is not a bad thing................


Paul

Tubetalk1
#13

...except when it comes to shipping Bakelite...if it is some typical eBay dummy who thinks that "proper packing" is a few sheets of newspaper wrapped around a fragile radio, and then the whole thing shoved into a too-small box, or a too-large box that lets the radio bounce around inside...

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM

[-]
Who's Online
There are currently 3164 online users. [Complete List]
» 2 Member(s) | 3162 Guest(s)
AvatarAvatar

>