Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Big score!
#1

So I drove the 7 hour round trip to pick up this 37-116 standard dial. All original, rust free chassis, still plays, original finish(although a little rough, nothing a refinish wont take care of). Got it for $125 with a little bit of a surprise thrown in. When I picked it up, the gentleman said he had some tubes to go with it. It was about a 12x12x12 cardboard box. There was a brown paper bag full of what appeared to be miniature tubes and some TV tubes. Didnt think much of it because I was stoked to get the 116. After getting home and getting it unloaded(after explaining to the wife what a find it was and how much I wanted it), I started to go through the box. Figuring I was just going to end up trashing it because they were not radio tubes, I about fell over with what I found under the brown paper bag. It was a stash of 56 tubes, 85% of which where globes! 112A's, 71A's, 01A's, 22's, 26's, etc. I proceeded to clean them up and test them. I was astonished when 48 of the 56 tested near the top of the GOOD scale on my Hickok. The other 6 had life they where just weak. Ended up with 6 pairs of super strong 71A's and 8 pairs of the same in 112A's. I had no idea this was going to be in the box! I don't know which was a better score, the 116 or the tubes. In other words, I had a GREAT weekend!


Attached Files Image(s)
           
#2

Merry Christmas to you!!! Nice score!  Take care, Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#3

super find!
Icon_thumbup Icon_thumbup Icon_thumbup
#4

  What a great score Icon_thumbup Icon_thumbup  Thanks for posting.
#5

DEFINITELY worth the 7 hr round trip!  Great find!  Congrats! You're lucky to be able to use your kitchen for "display shootings".

Craig R
#6

Hey, 7hr drive is nothing if there is a good reward waiting at the end.
Nice score.
The Force loves you.
At least today.

Icon_lol

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Wow, amazing! Definitely worth the trip. What phenomenal luck. Congratulations!
#8

NICE SCORE!  I wish I could get that lucky just once. Nice find! Icon_clap Icon_clap Icon_thumbup Icon_thumbup
#9

I've been known to drive 200 miles (one way) for a pizza or a porterhouse.  I wind up with heartburn, but you have a nice stash of globe tubes!  Good score Icon_thumbup Icon_thumbup Icon_thumbup

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#10

 Try resoldering the pins on the weak testing tubes, as well as any grid caps, they may come up good.
Regards
Arran
#11

Those 71A's are always good to have...

Count me jealous

Me

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#12

Excellent find!  The -116 looks to be a beauty.  Congratulations!

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#13

And now the fun begins!!!

GL
Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM

[-]
Who's Online
There are currently 3320 online users. [Complete List]
» 3 Member(s) | 3317 Guest(s)
AvatarAvatarAvatar

>