Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help identifying a Wells Gardner console
#1

A friend who owns a local consignment store asked if I could help supply a year / model number for this Wells Gardner console recently brought in. There's no model number on the chassis or in the cabinet. Here are a few photos:

   

   

As best as I could find it's around a 1937.

Greg V.
West Bend, WI
Member WARCI.org
#2

7LL673

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Thank you!!

Greg V.
West Bend, WI
Member WARCI.org
#4

Greg,
How much does he want for that radio and will he ship it?
Steve
#5

Steve, I know they wouldn't have the means to pack the radio to ship it but perhaps if you were to make all the arrangements and have it picked up they could do it. Here's the website: http://www.furnishtraders.com/ You can contact them direct if you're interested. A husband and wife own it and the wife contacted me about the radio. Her name is Alixe.

Greg V.
West Bend, WI
Member WARCI.org
#6

Greg,
Thanks. She's sending me some more pictures.
Steve
#7

Great! It looks like a very nice radio. Hope you can work it out.

Greg V.
West Bend, WI
Member WARCI.org
#8

Greg,
Nice radio in the pics she sent me. With paying someone to pack it, along with the high $300 price tag, makes it really pricey. Thanks for the lead. It was worth checking into.
Steve
#9

Steve, you may want to check back with them in a month or so. If it's still in stock they may offer it at a lower price. willeezwarez on eBay seems to have good luck shipping consoles at a reasonable cost, but I believe he does his own packing.

Greg V.
West Bend, WI
Member WARCI.org
#10

$300 is too high.... like Greg suggested check back in a month or three with a more reasonable offer.  Also the dial is missing something, but I can't really tell if it is just a logo or something more significant:

   

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#11

Believe it's some sort of signal strength indicator.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#12

I have to wonder where people get their prices from sometimes, late 1930s console, needs refinishing, needs electrical restoration since it probably doesn't work, $300. Even where I am that would have to be priced at no more the $150 in a store like that, or it would just sit there, in a private sale no more then $100, and radios of that sort are much easier to come by in the U.S mid West then they are here. 
  With regard to the hole near the bottom I believe that it is some sort of vernier tuning scale, the pointer probably travels at three times the rate as the tuning dial pointer does.
Regards
Arran
#13

I had advised the owners with regard to antique radios not to just plug them in and "try them out". However they did turn this set on and surprisingly it worked well. Even the tuning eye. Of course that doesn't necessarily mean it had any electrical restoration done to it. It could be just that the original components are still functioning...for the time being. I paid $150 for my fully restored 1936 Sparton console a few years back but only because I know the man who restored it (he's a highly respected and knowledgeable member of our local radio club) and I know it was done right. He's not one to cut corners, so for all of the work he described doing, that was more than a fair price to me.

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM

[-]
Who's Online
There are currently 4286 online users. [Complete List]
» 2 Member(s) | 4284 Guest(s)
AvatarAvatar

>