Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Interesting new find
#1

Hi guy's,
Brought home a beauty today.
1938 Parmak masterpiece 7 tube ac -dc console in excellent condition.
Came from an elderly ladies farm house.
Has the Parmak AC conversion package and still has the original loop antenna.
Works great and has a beautiful multicolored dial with the manual station presets.
Has original owners manual with schematic and station is tabs.
Interesting thing is there some repair bills from 1949 that show transformer replacement for $3.45 which includes the service call.
E-cap repair for about the same price with service call charge of $2.00

These guy's were not getting rich.
Anyway the radio was professionally refinished at some point.
Looks great.
No info or pics to be found on the net.
I probably have more info than anyone on this set.
Will load pics when I have time.
Murf

[Image: http://i1161.photobucket.com/albums/q509...C_0356.jpg][Image: http://i1161.photobucket.com/albums/q509...C_0357.jpg][Image: http://i1161.photobucket.com/albums/q509...C_0358.jpg]
#2

Neat one!


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

Brought home a beauty today.
1938 Parmak masterpiece 7 tube ac -dc console in excellent condition.
Came from an elderly ladies farm house.
Has the Parmak AC conversion package and still has the original loop antenna.
Works great and has a beautiful multicolored dial with the manual station presets.
Has original owners manual with schematic and station is tabs.
Interesting thing is there some repair bills from 1949 that show transformer replacement for $3.45 which includes the service call.
E-cap repair for about the same price with service call charge of $2.00

These guy's were not getting rich.
Anyway the radio was professionally refinished at some point.
Looks great.
No info or pics to be found on the net.
I probably have more info than anyone on this set.
Will load pics when I have time.
Murf


Nope, not that one.
Mine is a console with a teledial dial.
7 tubes , ac-dc.
#4

2 speakers?

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

Ooooooh, The console...
Mucho niceo!

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

Murf;
  Those Parmak sets are poorly documented to say the least, I think that this set might be in Riders but in either the 1940 or 41 book, but the set was from from a few years earlier. I would suggest that if it works now, and everything underneath looks more or less original, that as you recap the set put everything back exactly as it was, take lots of pictures of the underside and make lots of notes. If they used lacquer in the refinish you should be able to spray some shading lacquer over the molding and grille bars, just to get rid of that monochrome look that a lot of refinishing shops seem to use, at least they didn't make them blond.
Regards
Arran
#7

The radio came with the original owners manual which also has schematic.
Looks like it was restored, but I have not taken the chassis out to look.
It plays good so I will leave it alone for now.
Sure like the colorful dial.
Murf
#8

You might like this one. It is a farm set (6V). This is the one that I still have the original box.

   

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#9

Wow, I love that one too.
Hard to find info on thes.
Don't recall seeing anything on yours either.
Murf
#10

I love the look of Australian Walnut on that Parmak that Russ owns, that's an unusual choice of wood for an American set for some reason, though they used a lot of it in Canadian sets, and Australian ones too obviously.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Hickok AC51 tube tester
Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM
IF can wire size and Rubber mounts?
A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM
My last cabinet for this year
Hello Dan, That is really beautiful what great looking radio you have ! I have friends who live in Calgary and the wea...radiorich — 01:51 AM
12' Philco
Not anymore Mike. Andre The Giant Born: May 19, 1946, Coulommiers, France Died: Jan 28, 1993 (46 years), Paris, Fran...RodB — 11:53 PM
IF can wire size and Rubber mounts?
Renovated Radios do carry what you need. As for the voltage, a wire should be at least 300V-rated.morzh — 11:13 PM
12' Philco
Andre the Giant got 2" on Kareem :lol:morzh — 11:11 PM
IF can wire size and Rubber mounts?
Thanks for the info but I doubt that a hardware store would be carrying the proper tuner assembly support mountings for ...georgetownjohn — 10:38 PM
12' Philco
Perhaps Kareem Abdul Jabbar?GarySP — 10:33 PM
My last cabinet for this year
Outstanding work, Dan! Take care and BE HEALTHY! GaryGarySP — 10:31 PM
My last cabinet for this year
They are a nice looking radio, Stromberg. I have a small tabletop octagon-dial one. It sounds surprisingly nice. And t...morzh — 09:40 PM

[-]
Who's Online
There are currently 5685 online users. [Complete List]
» 1 Member(s) | 5684 Guest(s)
Avatar

>