09-02-2009, 12:48 PM
Hello everyone,
Currently working on a Philco 42-355....have re-capped and changed out of tolerance resistors, general cleaning and replaced a few wires. Problem is, i seem to have an open audio output transformer. I started taking the old transformer apart to try and find a break in the wires to no avail. Must be pretty deep. Any suggestions for a replacement transformer that I could use? The Philco # is 32.8120M - measures 150 ohms from each side to CT. 300ohms total across ends. Any suggestions appreciated.
Joe
Currently working on a Philco 42-355....have re-capped and changed out of tolerance resistors, general cleaning and replaced a few wires. Problem is, i seem to have an open audio output transformer. I started taking the old transformer apart to try and find a break in the wires to no avail. Must be pretty deep. Any suggestions for a replacement transformer that I could use? The Philco # is 32.8120M - measures 150 ohms from each side to CT. 300ohms total across ends. Any suggestions appreciated.
Joe
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
