Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

40-155T Bezel
#1

Greetings-

I started to restore a 40-155T that I purchased locally, and quickly found I was in over my head.  I hired a local guy to restore the electronics, and I'm looking at tweaking the cabinet.

I see youtubers posting about this radio and their bezels are shiny and gold -- mine seems to have faded and is dull and silverish.  What's the recommended restore-- do I polish or paint?  If I paint, is there a recommended paint/shade?

Also noted in one youtubers video, the background color in the dial class is the "wine" color of the buttons, where mine is just the plain color of the bulb.  Is this something that restorer did to make his unique?

Thanks so much!

David
#2

I don't know for sure but suspect the bezel was an aged brass look. Bob Andersen did a 39-30 and has a youtube on it showing how he did the bezel. I followed along for a 39-25 restoration and described it in my notes. Hope it helps.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3626 online users. [Complete List]
» 2 Member(s) | 3624 Guest(s)
AvatarAvatar

>