Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Philco 66, 37-61, and 38-10, Evolution Of A Design
#1

I have restored all three of these radios over the years, and the detailed threads on the work can be found here:
Model 66B
Model 37-61B
Model 38-10
However, a quick look at their schematics tells the tale. From the Model 66, to the Model 37-61, to the Model 38-10, we see the evolution of a 2 band All American 5.

[Image: https://64.media.tumblr.com/5508e135e754...0d8553.jpg]
[Image: https://64.media.tumblr.com/1fbee4fddbf3...660aa0.jpg]
[Image: https://64.media.tumblr.com/32a6c8e58d00...4df859.jpg]
Even their frequency coverage is similar:
Model 66  540 - 1720 KC and 5.7 - 18 MC
Model 37-61  530 - 1720 KC and 5.7 - 18.2 MC
Model 38-10  540- - 1720 KC and 5.7 - 18 MC

Over the years the styling changed from the "beehive" cabinets of the 66B and 37-61B to the "bullet" styling of the 38-10T. The performance improved only slightly, but is surprisingly good for radios without a tuned RF amplifier stage before the mixer oscillator. They cover the entire AM broadcast band, and the old "low police band" which was popular for people to listen to police calls back in the days when it was used, just as police scanners are today. The shortwave band covers all the frequencies most often used for international broadcast. With a decent antenna they pull in the stations surprisingly well.
#2

Hello mike,
very interesting.

Sincerely Richard




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently no members online.

>