Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

GE model GD-60
#1

Yesterday after a disappointing trip to the Hartville Flea Martket (don't get me started on it), I stopped in at an antiques shop nearby and bought an unusual little General Electric radio. I initially mistook it for an old intercom as it looks alot like one! Turned out it is a model GD-60 am "compact" radio with five tubes and one ballast tube. Radio is complete and in decent shape, but there was one moment of panic. I pulled the chassis to inspect it and was presented with a crumpled, butchered, crumbling, and flaking asbestos pad! ARG! I grabbed a dust mask and some disposable gloves and hauled the cabinet outside for an asbestos removal. I managed to get it removed, sealed in a plastic bag and disposed of safely. If it had been intact I would have left it alone, but this thing was falling apart! Plenty of vents in the bottom of the cabinet to keep things cool though. I will have thise little guy rebuilt soon. It is kinda unique looking. Icon_biggrin

No matter where you go, there you are.
#2

cool I have many radios with asbestos lining the wood under the chassis popular problem. By the way just bought a zenith 8G625 at a flea market. Old radios are so cool!
#3

I found one of those in an antique store several years ago. It had sat in water at some time. I refinished the cabinet, replaced decals on both knobs, and worked on the chassis. Just played it a few days ago...sounds good. One of my "keepers."
#4

Mine just went out with a group of radios to be rebuilt yesterday, so hopefully I'll hear it speak soon.

No matter where you go, there you are.
#5

Nice looking set!!! If your ballast tube is open it can be replaced with a diode on this set.
Good luck!
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
With regard to the speaker, unless the cone is so brittle that it crumbles as soon as you touch it I would try to repair...Arran — 04:07 AM
Philco 42-345 Restoration/Repair
That silver can capacitor is an aluminum electrolytic. You should replace it with an aluminum electrolytic with the valu...RodB — 11:46 PM
Philco 42-345 Restoration/Repair
Thank you Rodb and Gary for helping with clarification on these capacitors. Other than the Tiny 630volt one I'm not sure...osanders0311 — 10:17 PM
1949 Motorola 5A9M
Hello All; I found the CMB41L down in the basement, it is definitely a 1950-51 model, the capacitors have date codes ...Arran — 07:48 PM
Philco 42-345 Restoration/Repair
Hi, all the caps I order, other than the electrolytics, are of the 630V rating. No worries on it being too high, and no ...gary rabbitt — 05:46 PM
Philco 42-345 Restoration/Repair
Hi, there's a lot to consider when designing these circuits so you shouldn't have a lot of concern when replacing caps. ...RodB — 02:03 PM
Philco 42-345 Restoration/Repair
I have ordered and received new caps for this radio and hope I've ordered the correct ones. I tried matching them to the...osanders0311 — 11:35 AM
Philco newbie with P-1891-WA console questions
Hello Jeff , Far as the Electrolytic capacitors go here is a list of parts. that will work . I like using Nichicon and...radiorich — 09:50 PM
Philco newbie with P-1891-WA console questions
Well, I've been stumped at trying to get the first of 11 electrolytic capacitors. I got a schematic and have a list of t...Jeffcon — 07:54 PM
Model 80 Antenna Issue?
Thanks Gary and Rod.  I also found an article in the Philco Repair Bench under Service Hints and Tips, about installi...Hamilton — 12:32 PM

[-]
Who's Online
There are currently 437 online users. [Complete List]
» 1 Member(s) | 436 Guest(s)
Avatar

>