Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 18
#1

Hello, again !
I just picked up a nice Model 18 with the original back still on it...It is different than the 18x shown on Philcoradio.com, though. The main difference is that it has 2 of the lyre inlays.. One at the top of each of the fluted trim pieces, instead of the single centered one...What other differences are there between the 18 and 18x? I don't know if it works or not,but for $20, I don't really much care.It's pretty nice cosmetically.I haven't had a free minute to throw it on the variac or get photos as of yet, but I will try in this coming week.
Andy
#2

Do you mean like this one?

http://www.philcoradio.com/gallery/1933d.htm#e

This, too, is an 18X. Very nice set, and you managed to acquire it at a bargain-basement price. Looking forward to the photos! Icon_smile

--
Ron Ramirez
Ferdinand IN
#3

No... it's like the ones on the 1935 (fall 1934) page... They use the same photo for the 18x, 49x, 118x, and 144x. but like the 1933 model you showed me, it has the lyres atop each fluted side trim. The inside label tags it as a Model 18... not 18x... The place I got this one also has another pretty rough Philco R/P Console with a missing label.... It has almost the same face as my 41-250, but the dial scale has more printing on it, and it has the more rectangular push buttons. It has a low speaker, and mid pull out phonograph. On either side of the phonograph, there are large rectangular openings that look like record storage pockets missing the doors.. It was very crowded in, and I couldn't get a very good look at it. I could snap it up real cheap... but I don't know what I would do with it. I don't really want any more basket cases....
Andy
#4

andyjon100 Wrote:They use the same photo for the 18x, 49x, 118x, and 144x.
It's my website, and I put the photos there since according to Philco Furniture History, those four models used the same cabinet. I really don't like using those poor quality illustrations, but I depend on other folks such as you to furnish better quality photographs. So...I'm hoping you would be willing to share photos for the Gallery. Icon_smile

Oh yes, it's an 18X. It will not say 18X inside. It will only say "CHASSIS TYPE 18" on the back of the chassis, and "PHILCO MODEL 18" on the tube layout sticker. But if it is like this one:

http://www.philcoradio.com/gallery/1935b.htm#b

but with two lyres instead of one, it's still an 18X.

Regardless if it's a 1933 or 1935 model, it was still a bargain.

--
Ron Ramirez
Ferdinand IN
#5

Ron... I would be happy for you to use photos of my 18 on your site! I'll get some up here as soon as I am able!
Andy




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3636 online users. [Complete List]
» 2 Member(s) | 3634 Guest(s)
AvatarAvatar

>