Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I've got a 610! Schematic?
#1

Hi Pholks!

I'm brand new to the Phorum, and brand new to radios. I have been building tube guitar and some hi-fi amps for a few years.

I'm here because a friend gave me her Philco, a 610 as I just discovered (see pic), and I'm looking to do a bit of restoration. From the photos, you'll see that it's in pretty good shape, and that someone has done a partial recap at some point. I brought it up on the variac w/ light bulb limiter, and it works! I was able to tune in several AM stations.

I've been soaking up some info here, so I have some idea what I'm in for, rebuilding bakelite blocks and such. Alignment sounds scary, but I'll burn that bridge when I come to it. The question I have at the moment is, do I have the right schematic. This is the closest I've found. It almost matches my tube complement. I've got a 41 output tube, it shows a 42. Would that be a common production variation? Or maybe whoever worked on it before changed tube types? Any clues much appreciated.

I'm excited! My first old radio! Until a few days ago I couldn't have told you what a field coil was. What? There weren't always permanent magnets?? Icon_biggrin

John

[Image: http://grandpaslab.com/wp-content/upload..._front.jpg][Image: http://grandpaslab.com/wp-content/upload...430910.jpg][Image: http://grandpaslab.com/wp-content/upload...03/016.jpg]
[Image: http://grandpaslab.com/wp-content/upload...490200.jpg][Image: http://grandpaslab.com/wp-content/upload...03/015.jpg]
#2

Hi and welcome!

Yes, you have a 610B, and yes, the schematic you have is a 610 schematic.

The 610 underwent numerous circuit changes during production. In order to have all of these, I suggest you order the service pack for this set from Chuck - well worth the $7 cost.

http://www.philcorepairbench.com/

A 41 will substitute for a 42 in a pinch, but it's best to use the proper 42 tube. The characteristics of the two are not exactly alike, plus the 41 has lower output power.

--
Ron Ramirez
Ferdinand IN
#3

Thanks, Ron. I've placed my order with Chuck, and found what looks to be a good 42 for a reasonable price on eBay.




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
My last cabinet for this year
Hello Dan, That is really beautiful what great looking radio you have ! I have friends who live in Calgary and the wea...radiorich — 01:51 AM
12' Philco
Not anymore Mike. Andre The Giant Born: May 19, 1946, Coulommiers, France Died: Jan 28, 1993 (46 years), Paris, Fran...RodB — 11:53 PM
IF can wire size and Rubber mounts?
Renovated Radios do carry what you need. As for the voltage, a wire should be at least 300V-rated.morzh — 11:13 PM
12' Philco
Andre the Giant got 2" on Kareem :lol:morzh — 11:11 PM
IF can wire size and Rubber mounts?
Thanks for the info but I doubt that a hardware store would be carrying the proper tuner assembly support mountings for ...georgetownjohn — 10:38 PM
12' Philco
Perhaps Kareem Abdul Jabbar?GarySP — 10:33 PM
My last cabinet for this year
Outstanding work, Dan! Take care and BE HEALTHY! GaryGarySP — 10:31 PM
My last cabinet for this year
They are a nice looking radio, Stromberg. I have a small tabletop octagon-dial one. It sounds surprisingly nice. And t...morzh — 09:40 PM
Philco 41-608 changer coupler
Different years but the same idea.morzh — 09:38 PM
My last cabinet for this year
That’s a beauty! :thumbup:klondike98 — 09:24 PM

[-]
Who's Online
There are currently no members online.

>