Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

philco 37-600 37-602
#1

hi guys and Brenda
I have a 37-600 and bought what was to be another for parts but tubes are deferent has 25a6g and 25z6g so looking seams to be a 37-602 ? why people take stickers of ill never under stand cabinets look same but chassis are very different http://www.nostalgiaair.org/PagesByModel...013206.pdf
http://www.nostalgiaair.org/PagesByModel...013207.pdf
think ill redo both now still looking for darn knobs question which performs better ?
thanks sam
#2

The '600 is like the 80 and 84 a superhet w/a regen detector. The 602 is very different as it is a full superhet. The '602 is the better of the two. The model 600 and 602 use the older large pin tubes. The 37-600 and 37- 602 use the newer octal tubes and share the same cabinet. Knobs are very hard to come by for these sets. There different from all the other Philco knobs.
Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-1209 strange behavior
And no hum without the 7AF7? Not common but I am thinking heater - cathode short. This would introduce hum in this sta...MrFixr55 — 11:14 PM
schematics
Those filter caps in the cardboard tube are easy to restuff, especially the kind with the rolled over end. You don't hav...Arran — 09:56 PM
Philco Model 16 wiring question
If you have 5 wires, do this: The wires that go to thick-wire wound winding are the filament. If you do not know wha...morzh — 09:03 PM
Philco Model 16 wiring question
I recently acquired a Philco Model 16 Code 126. I removed the power transformer to place heat shrink on some very bad...bobclausen — 08:23 PM
1949 Motorola 5A9M
Hello Bob, That battery looks great nice job ! Sincerely Richardradiorich — 08:20 PM
1949 Motorola 5A9M
Yes, I plan to put a Velcro closer on the top.klondike98 — 07:28 PM
1949 Motorola 5A9M
Nice job on the battery, Bob. Can the box be opened to replace the 9 volters?RodB — 11:32 AM
Philco 46-1209 strange behavior
Thank you for the detailed response MrFixr. To clarify, the hum starts when the tubes are fully warmed up, and goes a...sq65 — 09:15 AM
Philco 46-1209 strange behavior
MrFixr The chassis, if there is no ground pin in the AC plug, due to the Y-caps from L/N to the chassis, is at 60VAC re...morzh — 08:47 AM
schematics
thanks I'll try the polar caps seperatelymseno — 07:38 AM

[-]
Who's Online
There are currently 741 online users. [Complete List]
» 1 Member(s) | 740 Guest(s)
Avatar

>