Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Nice chassis paint
#1

Hi,
I have been removing rust and dust from a 40-195 chassis for a few days now. I sprayed the chassis with a primer to get it ready for the final spray coats. I visited Home Depot and Lowes. Purchased some spray paint at Lowes and after spraying the chassis it just did not look authentic. So this morning I had some errands to run and groceries to buy at Wal-Mart. I figured I would check out their spray paint, I REALLY doubted there would be anything good at all. Oh my I was wrong. They have a GREAT match for my Philco. The brand is Krylon and the color is "nickel." After lightly spraying the topside of the chassis I flipped the old girl over and this paint is almost an exact match to the underside which is still in great shape.

I wanted to put this on the phorum to maybe spare someone the pain in the neck of going from hardware store to hardware store to hardware store. Rochester is 50 miles from me and that is the closest to Home Depot or Lowes I am. My Wal-Mart is 18 miles away. Still a considerable distance for just spray paint but I wish I would have checked there first. Since it is Krylon paint I imagine it is available in other places. I should buy a case to keep on hand. First time in years that I have found a GREAT match.

As always I would recommend to spray a small test area to make sure it matches your particular radio. Have a Great Day. Icon_biggrin
#2

Phil

THANK YOU for this great tip! After reading your post, I visited one of my local Wal-Marts (we have two in Evansville) and sure enough, they had the Krylon satin nickel paint!

I had tried a satin silver finish made by Valspar and purchased from Lowes previously, but I do like this satin nickel better. Besides, I feel the Krylon aerosols spray better than other paint brands.

I have begun painting what will become my Super 89 chassis with satin nickel after having primed it this past winter, at the same time I primed and painted my Super 71 chassis.
http://philcoradio.com/phorum/showthread.php?tid=1035

And you're right - so far, it looks VERY authentic to the color of Philco chassis made from about 1935 and later.

Will post photos later.

--
Ron Ramirez
Ferdinand IN
#3

Hi Ron,
Excellent, I am glad to hear you found the paint. I was impressed with the way my chassis came out too. I look forward to seeing your pictures. Thanks!
#4

Hello Ron,
I agree with your
Quote:I feel the Krylon aerosols spray better than other paint brands
I love to restore antique lighting and Krylon makes a great brass color paint that I use for repainting Icon_wink I'llo try that nickle .
sincerely Rich
#5

I like the new adjustable Krylon "fan-spray" tips included on the newer Krylon spray cans! You can turn them for horizontal or vertical spraying. Leaves a nice "pro" finish, and reaches those hard to get places also! Go Krylon! Icon_wink




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM

[-]
Who's Online
There are currently 3909 online users. [Complete List]
» 1 Member(s) | 3908 Guest(s)
Avatar

>