Found—Model 40-150 in Chinese black lacquer highboy cabinet
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Posts: 5,072
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Welcome to the Phorum!
Its not a Philco cabinet, that's for sure. I would suspect there are not many other cabinets like it.
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Thanks, Bob. I'll post pics as it comes back together. Cabinet is mahogany with black lacquer. 3 legs were snapped at the top, but should be repairable. I'm looking forward to it, but more so to the radio restoration. I have a number of radios waiting for me to learn more before I start, including a 1930 Kellogg Model 524 that will be last on the list. This is a shot of the back panel to the cabinet.
Posts: 1,183
Threads: 23
Joined: Jan 2014
City: Wellborn Florida
Some info from Beitmans
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Whatever it is, it is an uncommon radio and didn't become any worse from being put in this cabinet.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Hello. That looks like the part # 38-9935 of the cardboard antenna back. I have a model 40-150 Philco. It is in a wood slant front cabinet.
Restored the chassis 3yrs ago. I think they have the rubber wire that is usually rotten and falling apart. Good luck with the restoration plenty help here if you need it.
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Thanks, Mike. Looking forward to it!
Posts: 4,107
Threads: 310
Joined: Nov 2013
City: Kings Park NY
FANTASTIC!
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Posts: 4,107
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Momma LIKE!
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Good job getting it back up on its feet.
Posts: 358
Threads: 4
Joined: Aug 2015
City: Monteith, Ontario CA
I wonder if the antiquity here is NOT the radio as much as the cabinet. Maybe you should take your photos to an antique furniture specialist and see if the cabinet is rare and worth donating to a museum or ... what it's history might be?
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Delco car radio Peko vibrator converstion issues
|
Rich,
There is an Australian website (Cool386.com) that has much useful info regarding repair and restoration of vibr...Joe Rossi — 07:29 PM |
Jackson 715 not working
|
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM |
Jackson 715 not working
|
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM |
HiFi (Chifi) tube amp build - but my own design.
|
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM |
Jackson 715 not working
|
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM |
Restoring Philco 37-604C
|
Yep. F5 is green, D5 is Red.
Red is Bad.
Green is Clean.morzh — 01:30 PM |
Jackson 715 not working
|
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM |
Restoring Philco 37-604C
|
(Insert Homer Simpson "DOPF" Here.)
When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM |
Philco 91 Speaker Replacement
|
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil.
It wo...morzh — 08:44 AM |
Philco 91 Speaker Replacement
|
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM |
Who's Online
|
There are currently 3775 online users. [Complete List] » 4 Member(s) | 3771 Guest(s)
|
|
|
|