Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

39-55 chassis
#1

Hi everyone,
I got around to pulling the chassis from my 39-55 and thought I would post some pics. Apart from a lot of dust the chassis is in excellent conditionIcon_clap! Rubber grommets and bushings are still flexible and most of the original rubber coated wires are still in remarkably good shape (as compared to my 40-150)!
The only non original parts I can see are two Aerovox electrolytic caps, all other components seem to be the originals. Also all but two of the tubes are Philco brand. the 80 rectifier is a RCA tube and one other is a Sylvania.
[Image: http://i1160.photobucket.com/albums/q500...95ccd6.jpg]
[Image: http://i1160.photobucket.com/albums/q500...be94da.jpg]
[Image: http://i1160.photobucket.com/albums/q500...ec1d7e.jpg]
[Image: http://i1160.photobucket.com/albums/q500...de59f8.jpg]
[Image: http://i1160.photobucket.com/albums/q500...ae6426.jpg]
[Image: http://i1160.photobucket.com/albums/q500...de7267.jpg]
[Image: http://i1160.photobucket.com/albums/q500...3a76ce.jpg]




Users browsing this thread:
[-]
Recent Posts
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM
Philco 91 Speaker Replacement
Yes, I often have to substitute, then keep an eye out for an original. In the meantime, the radio is working and being e...RodB — 08:02 AM

[-]
Who's Online
There are currently 3587 online users. [Complete List]
» 2 Member(s) | 3585 Guest(s)
AvatarAvatar

>