Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Can someone ID this Emerson Radio?
#1

Need the model info for this radio. Picture is of the cabinet. Chassis is on the bench. Thanks for any help!
#2

From the Stein book looks like model 146 ten tubes, 3 bands. Your picture does not show the base.
#3

Hi;
Please post a picture of the chassis and what tubes the set has, it will help narrow it down enormously.
Best Regards
Arran
#4

Perhaps it is a console version of the Emerson mod 140 large wood tabletop with same chassis( 1937)? Radio Attic has 4-photos, one with chassis view, of the mod 140,w same number of knobs/shafts, & placement thru cabinet openings. Same shape dial escutcheon, & exact eye-tube escutcheon also. Many mfgrs of that era used the same chassis in different cabinets designs.It looks very similar, & worth a look anyways. Heres a link to compare photos with your chassis on your workbench, just in case it is a match?:

http://www.radioatticarchives.com/radio.htm?radio=8183





Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM
Philco 91 Speaker Replacement
Yes, I often have to substitute, then keep an eye out for an original. In the meantime, the radio is working and being e...RodB — 08:02 AM

[-]
Who's Online
There are currently no members online.

>