16 cathedral survived a trip to Ukraine
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
And is working out of the box.
That radio was purchased 1-1/2 years ago in Kutztown from John "Hagstar" Hagman to be shipped to Peter in Ukraine. Eventually it got shipped.
It'll have to have some things replaced but receives on all bands nevertheless.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 572
Threads: 20
Joined: Nov 2014
City: Svalyava Transkarpatia
State, Province, Country: Ukraine
An immense gratitude to Michael for helping him deliver this wonderful radio to Ukraine and John "Hagstar" Hagman for his beautifully preserved status and excellent work. Thanks, friends. I'm in debt to you and will definitely give thanks.
Here's how this Philco 16B works.
[Video: https://www.youtube.com/watch?v=mgM1TJVg65o]
(This post was last modified: 10-10-2017, 02:46 AM by RadioSvit.)
Posts: 4,107
Threads: 310
Joined: Nov 2013
City: Kings Park NY
BeauTiFul!!!
Good boy Mikie...
I dread shipping larger table radios..
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Pack it right and they shall receive
I shielded the back with a piece of cardboard so the peanuts or bubbles don't get inside, then shielded the front with a Styrofoam board I had on hand, then stabilized the spaces in the first box (slightly larger than the radio) with peanuts, then taped the first box, then put it in the second box that had about 2" on each side and about 1" on top (otherwise the next size up box would have 5" on each side and would cost $50 instead of $15 - I considered the spacing sufficient), having put 2" of peanuts on the bottom first, and then filled each side and top spaces with peanuts and bubbles I had on hand. This seems to work.
Again, it traveled by sea, so I do not know if air travel is inherently more dangerous or not. It does travel in trucks at least some as it has to be delivered to the port and from the port to the local office of the carrier.
I'd say if all had to be bought from UPS store (I bought the large box from them), it would be app. $30 to $35 in packing materials. Obviously if one is in the business of shipping stuff, buying from Uline in bulk should make it much cheaper.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 5,072
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Posts: 765
Threads: 147
Joined: Aug 2012
City: Dallas, TX
Awesome , made in USA. You go radioSvit. Beam me up Scottie.
(This post was last modified: 11-24-2017, 09:09 PM by Fred Taylor.)
Posts: 572
Threads: 20
Joined: Nov 2014
City: Svalyava Transkarpatia
State, Province, Country: Ukraine
I did not understand anything ... Google translator does not want to speak Ukrainian in a clear way ... Now I ask Michael to help him ...
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
He said, "здорово, сделано в США. Давай, RadioSvit. "
Beam me up, Scotty - модифицированная фраза из Стартрека , означает "с меня хватит, забери меня отсюда".
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 572
Threads: 20
Joined: Nov 2014
City: Svalyava Transkarpatia
State, Province, Country: Ukraine
Thank you Michael. Michael:Google - 3:0.
Posts: 765
Threads: 147
Joined: Aug 2012
City: Dallas, TX
(This post was last modified: 11-26-2017, 08:08 AM by Fred Taylor.)
Posts: 572
Threads: 20
Joined: Nov 2014
City: Svalyava Transkarpatia
State, Province, Country: Ukraine
Hello Frederic . I live in an area bordered by Romania - a little over 100 miles to the border. But I have never traveled there because there is no way to go there - there is no tube radio, they were not made there. . ... And I like only those countries where you can buy an old lamp radio. Another thing is Hungary and Austria - there are very interesting copies of antique radio engineering.To the Hungarian border I am much closer - only 50 miles.
(This post was last modified: 11-26-2017, 08:45 AM by RadioSvit.)
Posts: 88
Threads: 35
Joined: Dec 2013
City: Tulsa, OK
is it costly to ship to the Ukraine I know I just ship a philco 60b via fedx and it was 70.00 to ship it in the U.S.A
benny
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
No it isn't. The radio I shipped, a 16 cathedral, was under $80. It is way larger than a 60B.
But, it is shipped by sea, meaning it takes around 2-3 weeks to get there. Which is fine for this purpose.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 88
Threads: 35
Joined: Dec 2013
City: Tulsa, OK
that's not bad but what I don't understand is why is shipping so high in the U.S fedx usps and ups are pushing the two day shipping and raising the cost I went to the post and fedx they don't really have ground. I don't care if it takes a week to get somewhere bnut they wont ship it that way
benny
Posts: 4,682
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Something isn't right there, all three should have an option other then two day shipping. The USPS has a website that allows you to look at their shipping rates, usually all you have to do is type in the destination and the weight, if that doesn't work then they have a page with service tables on it, they also have the option of buying postage online, but not with all services. Probably the best option for heavy objects is to ship by bus if you can, less transfers, or loading and unloading of packages. Here is a Fed Ex page stating that they have ground shipping, have you looked through it, sometimes the guys at the counter don't really know anything or are just trying to up sell a more expensive service.
https://www.fedex.com/en-us/shipping/ground.html
Regards
Arran
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Jackson 715 not working
|
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM |
HiFi (Chifi) tube amp build - but my own design.
|
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM |
Jackson 715 not working
|
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM |
Restoring Philco 37-604C
|
Yep. F5 is green, D5 is Red.
Red is Bad.
Green is Clean.morzh — 01:30 PM |
Jackson 715 not working
|
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM |
Restoring Philco 37-604C
|
(Insert Homer Simpson "DOPF" Here.)
When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM |
Philco 91 Speaker Replacement
|
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil.
It wo...morzh — 08:44 AM |
Philco 91 Speaker Replacement
|
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM |
Philco 91 Speaker Replacement
|
As Rod said, it is OK to use a fitting speaker, and then look for an original one.
If you buy a Hammond 125 output tr...morzh — 08:15 AM |
Philco 91 Speaker Replacement
|
Yes, I often have to substitute, then keep an eye out for an original. In the meantime, the radio is working and being e...RodB — 08:02 AM |
Who's Online
|
There are currently no members online. |
|
|