[murf]

The first voltage I would have measured is pin 5 of the 6L6; that's typically around -15 volts.  

I would suspect that you have a problem in the resistor network that's connected to the B+ center tap winding.  If the pin 5 voltage is wacky, go to those resistors; one of them has gone way high in value.

Did that and they check -20v on both tubes.
I am satisfied now that it has about as good a sound as it gets.
Plenty of volume as well.
Back in the cabinet now and on to the next one.
Thanks for all the help everyone.
murf

[Image: http://i1161.photobucket.com/albums/q509...38-116.jpg]