04-09-2017, 11:12 AM
Welcome to the Phorum!
I had a 39-25 power transformer with bad wires. Took it out of the chassis, took off the clam shells, stripped the rubber wire insulation and cover it with heat shrink tubing of the correct colors. Often just squeezing the wire with pliers will crumble the bad rubber. After reassembly check continuity and for shorts.
I had a 39-25 power transformer with bad wires. Took it out of the chassis, took off the clam shells, stripped the rubber wire insulation and cover it with heat shrink tubing of the correct colors. Often just squeezing the wire with pliers will crumble the bad rubber. After reassembly check continuity and for shorts.
