Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Scott 16A
#15

There are many Sovtek 6L6 tubes, I have their Tung Sols I just bought. Depending on the lettering they will have different plate voltages etc. And they are not cheap.
6L6GC STR matched quad is $90 from Jim and $108 from somewhere else. These have higher plate voltage than regular 6L6G.
In my HF22 the self-bias voltage is -35V (100mA for both tubes across 350 ohm resistor).
If it were for CLASS A amp, I would say be mindful or displacing the working point too much so it will start distorting; for this which is I think AB see if your crossover remains smooth.
Personally I trust the engineers who calculated the working point of the amp.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
Scott 16A - by rfeenstra - 01-28-2018, 02:03 PM
RE: Scott 16A - by Brad Winder - 01-29-2018, 09:46 PM
RE: Scott 16A - by morzh - 01-30-2018, 09:20 AM
RE: Scott 16A - by rfeenstra - 01-30-2018, 05:39 PM
RE: Scott 16A - by Electrothaumaturgist - 01-30-2018, 06:37 PM
RE: Scott 16A - by rfeenstra - 01-30-2018, 07:31 PM
RE: Scott 16A - by rfeenstra - 03-03-2018, 02:43 PM
RE: Scott 16A - by Phlogiston - 03-03-2018, 04:16 PM
RE: Scott 16A - by rfeenstra - 03-03-2018, 07:51 PM
RE: Scott 16A - by Phlogiston - 03-03-2018, 08:02 PM
RE: Scott 16A - by rfeenstra - 03-03-2018, 08:21 PM
RE: Scott 16A - by rfeenstra - 03-03-2018, 10:52 PM
RE: Scott 16A - by Phlogiston - 03-04-2018, 09:41 AM
RE: Scott 16A - by rfeenstra - 05-07-2018, 11:21 PM
RE: Scott 16A - by morzh - 05-08-2018, 07:58 AM
RE: Scott 16A - by Arran - 05-09-2018, 04:05 AM
RE: Scott 16A - by rfeenstra - 05-09-2018, 07:48 AM
RE: Scott 16A - by morzh - 05-09-2018, 08:49 AM
RE: Scott 16A - by Phlogiston - 05-09-2018, 09:02 AM



Users browsing this thread: 1 Guest(s)