Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA 10T
#52

Electrothaumaturgist,
   The cabinet is not too bad. On the top side edge there is some veneer wear/loss and a piece of veneer missing on the rounded side and of course the normal scratches on the top etc. I think some of these larger heavy cabinets seemed to get more abuse just sitting. The top looks like something was sitting on it causing lighter and darker  areas. For the most part I think a clean up and something like Howard's  might make it more presentable.
          The dial cover plastic was missing along with the eye tube and holder assembly. I have replacements for both.My biggest concern is cleaning the dial.There is something white on one area.
          I will try to add a pic or two later.
     When this radio became available I was still grieving the loss of my 9T that I had sold at a past show. The price was right so after a road trip it was home with me..
           Ron,
    It's funny about no matter where you live the radios you like always seem so far away.I seem to a lot of appealing radios out your way. You know the grass is always greener elsewhere.
                                                           Henry


Messages In This Thread
RCA 10T - by Electrothaumaturgist - 04-27-2018, 12:02 AM
RE: RCA 10T - by Arran - 04-27-2018, 03:15 AM
RE: RCA 10T - by Electrothaumaturgist - 04-27-2018, 04:49 PM
RE: RCA 10T - by Phlogiston - 04-27-2018, 05:12 PM
RE: RCA 10T - by Paul Philco322 - 04-27-2018, 07:32 PM
RE: RCA 10T - by Electrothaumaturgist - 04-27-2018, 07:37 PM
RE: RCA 10T - by Phlogiston - 04-27-2018, 08:38 PM
RE: RCA 10T - by Electrothaumaturgist - 04-27-2018, 10:07 PM
RE: RCA 10T - by Arran - 04-28-2018, 02:40 AM
RE: RCA 10T - by Phlogiston - 04-28-2018, 09:28 AM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 06:28 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 06:33 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 06:35 PM
RE: RCA 10T - by Phlogiston - 04-28-2018, 06:36 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 06:42 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 06:45 PM
RE: RCA 10T - by Phlogiston - 04-28-2018, 06:48 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 06:49 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 06:51 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 06:53 PM
RE: RCA 10T - by Phlogiston - 04-28-2018, 07:05 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 07:09 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 07:17 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 07:19 PM
RE: RCA 10T - by Phlogiston - 04-28-2018, 08:21 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 08:30 PM
RE: RCA 10T - by Electrothaumaturgist - 04-28-2018, 08:45 PM
RE: RCA 10T - by Arran - 04-29-2018, 01:00 AM
RE: RCA 10T - by Electrothaumaturgist - 04-29-2018, 12:10 PM
RE: RCA 10T - by Ron Ramirez - 04-29-2018, 12:24 PM
RE: RCA 10T - by Phlogiston - 04-29-2018, 09:09 PM
RE: RCA 10T - by NostalgiaRadioTime - 04-29-2018, 09:22 PM
RE: RCA 10T - by Electrothaumaturgist - 04-29-2018, 11:31 PM
RE: RCA 10T - by Electrothaumaturgist - 04-29-2018, 11:43 PM
RE: RCA 10T - by Phlogiston - 04-30-2018, 09:36 AM
RE: RCA 10T - by Phlogiston - 04-30-2018, 11:36 AM
RE: RCA 10T - by Electrothaumaturgist - 05-04-2018, 11:41 PM
RE: RCA 10T - by Ron Ramirez - 05-05-2018, 09:13 AM
RE: RCA 10T - by PhilcoJohn - 05-15-2018, 06:05 PM
RE: RCA 10T - by Electrothaumaturgist - 05-15-2018, 08:07 PM
RE: RCA 10T - by Brad Winder - 05-15-2018, 09:54 PM
RE: RCA 10T - by Phlogiston - 05-15-2018, 10:02 PM
RE: RCA 10T - by Ron Ramirez - 05-16-2018, 05:18 AM
RE: RCA 10T - by Brad Winder - 05-21-2018, 05:28 PM
RE: RCA 10T - by Ron Ramirez - 05-21-2018, 06:35 PM
RE: RCA 10T - by Phlogiston - 05-21-2018, 10:16 PM
RE: RCA 10T - by Arran - 05-22-2018, 01:41 AM
RE: RCA 10T - by radiohenry - 05-22-2018, 11:26 AM
RE: RCA 10T - by radiohenry - 05-23-2018, 01:59 PM
RE: RCA 10T - by Electrothaumaturgist - 05-23-2018, 04:41 PM
RE: RCA 10T - by Ron Ramirez - 05-23-2018, 04:57 PM
RE: RCA 10T - by radiohenry - 05-24-2018, 06:39 AM
RE: RCA 10T - by Electrothaumaturgist - 05-24-2018, 05:05 PM
RE: RCA 10T - by NostalgiaRadioTime - 05-24-2018, 05:49 PM
RE: RCA 10T - by Electrothaumaturgist - 05-24-2018, 06:04 PM
RE: RCA 10T - by NostalgiaRadioTime - 05-24-2018, 10:48 PM
RE: RCA 10T - by Arran - 05-25-2018, 02:20 AM
RE: RCA 10T - by radiohenry - 05-27-2018, 11:30 AM
RE: RCA 10T - by Electrothaumaturgist - 05-27-2018, 10:40 PM
RE: RCA 10T - by Electrothaumaturgist - 09-08-2020, 02:50 PM
RE: RCA 10T - by Electrothaumaturgist - 09-08-2020, 03:14 PM
RE: RCA 10T - by Electrothaumaturgist - 09-08-2020, 03:27 PM
RE: RCA 10T - by Electrothaumaturgist - 09-08-2020, 03:42 PM
RE: RCA 10T - by Electrothaumaturgist - 09-08-2020, 03:51 PM
RE: RCA 10T - by Eliot Ness - 09-08-2020, 03:58 PM
RE: RCA 10T - by Electrothaumaturgist - 09-08-2020, 04:01 PM
RE: RCA 10T - by Electrothaumaturgist - 09-08-2020, 04:27 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM

[-]
Who's Online
There are currently no members online.

>