04-27-2019, 04:02 PM
So, after seeing the HV windings of the transformer as shown in the last post, I'm glad I took the decision to rewind. Here are some photos:
Primary winding:
Center tap of final filament winding for most of the tubes. 10 turns of parallel 14 AWG wire.
All windings finished:
Re-assembly. Core was re-assembled, clamped together, then heated to re-melt the wax to hold the lamination tightly together.
Primary winding:
Center tap of final filament winding for most of the tubes. 10 turns of parallel 14 AWG wire.
All windings finished:
Re-assembly. Core was re-assembled, clamped together, then heated to re-melt the wax to hold the lamination tightly together.