06-15-2020, 06:48 AM
>a new 4.7M ohm 2W resistor I used temporary a 0.7W.
If you are speaking of #34 there is very little current flow thru this resistor.
An 1/8 w would be fine too.
If you are speaking of #34 there is very little current flow thru this resistor.
An 1/8 w would be fine too.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
