04-29-2021, 01:17 PM
I do have a question regarding; “the negative side of C17 goes to the other isolated terminal of the strip and then to the second terminal in from the catty corner on the terminal board, where R10, a red (or blue?), and a black and brown wire attach.”
I can see that but I’m attaching a link to a photo of what is supposed to be the same radio (RCA 7A) that has a red wire from the base of C17 going to the speaker. Should I run a red from the - C17 connection to the speaker and then back to center tap of the high voltage secondary of the power transformer.
Just asking because my wiring diagram does show that the GE 22 does have a lug at the base of C17.
http://wd4eui.com/Pictures/Antique_Radio...is_Top.jpg
I can see that but I’m attaching a link to a photo of what is supposed to be the same radio (RCA 7A) that has a red wire from the base of C17 going to the speaker. Should I run a red from the - C17 connection to the speaker and then back to center tap of the high voltage secondary of the power transformer.
Just asking because my wiring diagram does show that the GE 22 does have a lug at the base of C17.
http://wd4eui.com/Pictures/Antique_Radio...is_Top.jpg
