04-12-2011, 05:57 PM
Hi
A good way to get glue where the ply is separating is to use a straw. Flatten the end, fill it with glue, place the flattened end between the separated ply and roll the other end to force the glue into the separation. Then clamp.
Steve
A good way to get glue where the ply is separating is to use a straw. Flatten the end, fill it with glue, place the flattened end between the separated ply and roll the other end to force the glue into the separation. Then clamp.
Steve
M R Radios C M Tubes
