08-27-2022, 01:05 AM
On the H-13 not a bad idea to check the primary winding of the opt. I've run across a few open ones. Big let down. Can be done by just measuring the resistance from any of the four pins to each other. Should see no less than 5k or so.
On the 66 I have one of the Moderne style. Serviced it a number of yrs ago. Good player and was surprised that the calibration on the sw band is very good considering there's no adjust. PB Blaster is good stuff to loosen stuck parts. WD-40 is a waste of time by comparison.
https://philcoradio.com/library/download...%20197.pdf
G.L.
On the 66 I have one of the Moderne style. Serviced it a number of yrs ago. Good player and was surprised that the calibration on the sw band is very good considering there's no adjust. PB Blaster is good stuff to loosen stuck parts. WD-40 is a waste of time by comparison.
https://philcoradio.com/library/download...%20197.pdf
G.L.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
