|
Replacing electrolytic cans with E-caps for 40-180?
07-27-2006, 11:22 AM
Jun, if that metal mesh was inside the can its aluminium and I don't think you can solder to it. If you can get a 4-40 bolt and nut through it you might be able to bolt a lug to it and then solder to the lug. Make sure you insulate positive lead so it doesn't short in there. Pat
« Next Oldest | Next Newest »
Messages In This Thread
Replacing electrolytic cans with E-caps for 40-180? - by jslim22 - 07-11-2006, 11:27 PM
Replacing electrolytic cans with e-caps 40-180 - by planigan - 07-12-2006, 01:13 AM
[No subject] - by planigan - 07-16-2006, 09:29 PM
Stuffing the can? - by jslim22 - 07-19-2006, 02:11 PM
[No subject] - by 49Stude63 - 07-19-2006, 02:23 PM
Electrolytic stuffing. - by planigan - 07-19-2006, 10:59 PM
Stuffing cans - by planigan - 07-19-2006, 11:26 PM
Thanks to both - by jslim22 - 07-23-2006, 01:09 AM
Electorlytic Stuffing - by planigan - 07-23-2006, 10:33 PM
Cutting the wrong end of the cap - by jslim22 - 07-24-2006, 10:10 PM
Cutting the wrong end of cap - by planigan - 07-24-2006, 10:50 PM
[No subject] - by planigan - 07-27-2006, 11:22 AM
Thanks as always - by jslim22 - 07-28-2006, 02:38 PM
Users browsing this thread: 1 Guest(s) |
