06-30-2013, 08:03 PM
Hi All;
Morzh, Thank you for the more detailed explanation..
What about the two Audio transformers, the input transformer is fed by a number 30 tube fed by a 135 volt B+.. (I think I just answered my own question) then it goes to the number 19 tube.. the Output of the 19 tube goes to the Output transformer, which is also powered by B+ of 135 volts, thru the center tap.. So, just to verify, I could use it at 135 volts or maybe go about one half to one third of that figure to test each transformer ?? The transformer that is center tapped I would use half of what I would use on the other transformer, correct (Assumming I would be applying voltage to one side of the tap) ?? Once I (hopefully) found each transformer to be good I could put 135 volts to the one side and then find out the correct voltage for the other side of the transformer ??
THANK YOU Marty
Morzh, Thank you for the more detailed explanation..
What about the two Audio transformers, the input transformer is fed by a number 30 tube fed by a 135 volt B+.. (I think I just answered my own question) then it goes to the number 19 tube.. the Output of the 19 tube goes to the Output transformer, which is also powered by B+ of 135 volts, thru the center tap.. So, just to verify, I could use it at 135 volts or maybe go about one half to one third of that figure to test each transformer ?? The transformer that is center tapped I would use half of what I would use on the other transformer, correct (Assumming I would be applying voltage to one side of the tap) ?? Once I (hopefully) found each transformer to be good I could put 135 volts to the one side and then find out the correct voltage for the other side of the transformer ??
THANK YOU Marty
