09-12-2014, 06:52 PM
What you are calling an "antenna cable" isn't an antenna cable at all. This is the audio cable. The "black metal box" is a matching transformer.
The two wires from the chassis to the screw terminals should be the 6.3V feed to light up the lamp inside the pickup. There should be a separate cable to power the phono motor, which definitely would not connect to those two screw terminals as that would be a major safety hazard, even in 1941.
I am at a loss as to what the "silver cylinder" might be. Can you post a photo? Also, if you can, post a photo of the underside of the phonograph.
The two wires from the chassis to the screw terminals should be the 6.3V feed to light up the lamp inside the pickup. There should be a separate cable to power the phono motor, which definitely would not connect to those two screw terminals as that would be a major safety hazard, even in 1941.
I am at a loss as to what the "silver cylinder" might be. Can you post a photo? Also, if you can, post a photo of the underside of the phonograph.
--
Ron Ramirez
Ferdinand IN
